When you perform the paircreate -split command using CCI, this log is output.
Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Pairsplit(LocalCopy)
++Copy Kind=Local
++P-VOL(Port-LUN-LDEV)=1A-2047-0x1A,S-VOL(Port-LUN-LDEV)=1B-3-0x3B,
MCU S/N=412345,RCU S/N=412345,Range=LU,
Virtual Storage Machine S/N=423456,Suspend Mode=Normal,Split Mode=Normal,
Copy Pace(TRK)=1,S-VOL Hidden Mode=Enable,Pool ID(TI)=10
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Copy Kind |
The local copy Local is output as the fixed value. |
|
P-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the primary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
S-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the secondary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
MCU S/N*1 |
The serial number of the local storage system |
|
RCU S/N*1 |
The same value as that of MCU S/N is output. |
|
Range |
The range of pair split Group: Split by the consistency group unit LU: Split by the LU unit |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No value is output when a virtual storage machine is not specified. |
|
Suspend Mode |
Indicates whether ShadowImage pairs are forcibly suspended at an error Normal: Not suspended, Force: Forcibly suspended If it is not specified at the command option or the pair is other than ShadowImage one, Normal is output. |
|
Split Mode |
The split mode when ShadowImage pairs are split Normal: The pair is split normally. Quick: The pair is split quickly. If it is not specified at the command option or the pair is other than ShadowImage one, a hyphen (-) is output. |
|
Copy Pace(TRK) |
The track size for copy |
|
S-VOL Hidden Mode |
Indicates whether the secondary volume is hidden after a ShadowImage pair is created Enable: Hides the secondary volume Disable: Not hides the secondary volume If it is not specified at the command option or the pair is other than ShadowImage one, a hyphen (-) is output. |
|
Pool ID(TI) |
The pool ID ofThin Image. If it is not paircreate –split operation, 0 (zero) is output. |
|
*1 When a virtual storage machine is specified, the value of the virtual storage machine is output. *2 For more information about the absolute LUN, see Command Control Interface Installation and Configuration Guide |
|