Pairsplit is an audit log generated when a command operation is performed with the DKCMAIN firmware version earlier than 83-04-0X-XX/XX.
Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx +Command=Pairsplit ++Copy Kind=Remote ++P-VOL(Port-LUN-LDEV)=1A-2047-0x1A, S-VOL(Port-LUN-LDEV)=1B-3-0x3B, MCU S/N=412345,RCU S/N=422364,Range=LU, Virtual Storage Machine S/N=423456
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Copy Kind |
Indicates whether the copy kind is Local copy or Remote copy Local: Local copy, Remote: Remote copy |
|
P-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the primary volume The port number and the LU number show the expanded LU of Command Control Interface No value is output when the pair operation is performed by Command Control Interface from the remote storage system The LU number is the absolute LUN*2 of Command Control Interface |
|
S-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the secondary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
MCU S/N*1 |
The serial number of the local storage system No value is output when the pair operation is performed by Command Control Interface from the remote storage system |
|
RCU S/N*1 |
The serial number of the remote storage system The same value as that of MCU S/N is output for Local copy. |
|
Range |
The range of pair split Group: Split by the consistency group unit LU: Split by LU unit |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No output when a virtual storage machine is not specified |
|
*1 When a virtual storage machine is specified, the value of the virtual storage machine is output. *2 For more information about the absolute LUN, see Command Control Interface Installation and Configuration Guide |
|