Modify Ldev(QoS Parameters)

Audit Log User Guide for VSP E Series and VSP G130, G/F350, G/F370, G/F700, G/F900

Version
88-07-0x
Audience
anonymous
Part Number
MK-97HM85024-10

Example

Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Modify Ldev(QoS Parameters)
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,Upper Throughput IO=2147483647,Upper Data Trans MB=2097151,Lower Throughput IO=-,Lower Data Trans MB=-,Response Priority=3

Detailed Information

Item

Description

Command

The command name

LDEV(LDKC:CU:LDEV)

The LDEV ID of an LDEV for which QoS parameters are to be set, changed, or deleted

Upper Throughput IO

The upper-limit value of the I/O rate (IOPS)

If the upper-limit value is not specified, a hyphen (-) is output.

If the upper-limit value is disabled, 0 is output.

Upper Data Trans MB

The upper-limit value of the transfer rate (MB/s)

If the upper-limit value is not specified, a hyphen (-) is output.

If the upper-limit value is disabled, 0 is output.

Lower Throughput IO

The lower-limit value of the I/O rate (IOPS)

If the lower-limit value is not specified, a hyphen (-) is output.

If the lower-limit value is disabled, 0 is output.

Lower Data Trans MB

The lower-limit value of the transfer rate (MB/s)

If the lower-limit value is not specified, a hyphen (-) is output.

If the lower-limit value is disabled, 0 is output.

Response Priority

The priority of the I/O processing

If the priority is not specified, a hyphen (-) is output.

If the priority is disabled, 0 is output.