Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Map Snapshot
++P-VOL(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
S-VOL(LDKC:CU:LDEV)=0x00:0xCC:0xDD,MU=1,
Virtual Storage Machine S/N=423456,
S-VOL Storage Machine S/N=412345,S-VOL Actual Controller ID=18,S-VOL Create=yes,S-VOL Nickname=Snapshot of ABCDEF ID:43707,
Resource Group ID=1,S-VOL ID Range Start(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
S-VOL ID Range End(LDKC:CU:LDEV)=0x00:0xCC:0xDD
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
P-VOL(LDKC:CU:LDEV) |
The LDEV ID of the primary volume When a virtual storage machine is specified, the LDEV ID of the virtual storage machine is output. |
|
S-VOL(LDKC:CU:LDEV) |
The LDEV ID of the secondary volume When a virtual storage machine is specified, the LDEV ID of the virtual storage machine is output. |
|
MU |
The MU number |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No output when a virtual storage machine is not specified |
|
S-VOL Storage Machine S/N |
The serial number of the actual storage system to which the secondary volume belongs |
|
S-VOL Actual Controller ID |
The controller ID of the actual storage system to which the secondary volume belongs 5: USP V/VM, 6: VSP, 7: VSP G1000/G1500 and VSP F1500, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM |
|
S-VOL Create |
Create the secondary volume automatically or not Yes: Create the secondary volume automatically No: Not create the secondary volume automatically |
|
S-VOL Nickname |
The name to be designated on the secondary volume The value is output only when S-VOL Create is Yes. |
|
Resource Group ID |
The resource group ID of the secondary volume No value is output when the Resource Group ID is not specified. |
|
S-VOL ID Range Start(LDKC:CU:LDEV) |
Indicates the start LDEV ID for searching the secondary volume to be automatically numbered. No value is output when the LDEV ID range of the secondary volume is not specified. |
|
S-VOL ID Range End(LDKC:CU:LDEV) |
Indicates the end LDEV ID for searching the secondary volume to be automatically numbered. No value is output when the LDEV ID range of the secondary volume is not specified. |