Extend Ldev

Audit Log User Guide for VSP E Series and VSP G130, G/F350, G/F370, G/F700, G/F900

Version
88-07-0x
Audience
anonymous
Part Number
MK-97HM85024-10

Example

Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Extend Ldev
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
Virtual Storage Machine S/N=423456,
Size=200 Capacity

Detailed Information

Item

Description

Command

The command name

LDEV(LDKC:CU:LDEV)

The LDEV ID of the virtual volume for Dynamic Provisioning to be extended

When a virtual storage machine is specified, the LDEV ID of the virtual storage machine is output.

Virtual Storage Machine S/N

The serial number of the virtual storage machine

No output when a virtual storage machine is not specified

Size

The capacity and method for specifying the capacity of an LDEV to be created

Specifying the capacity

  • Capacity: Specify a capacity by the byte or block.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Offset-Capacity: Specify a capacity by the byte or block, and then the storage system corrects the capacity.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Cylinder: Specify a capacity by the cylinder.

For details, see the section describing CV size calculation in Provisioning Guide.