Add Snapshot

Audit Log User Guide for VSP E Series and VSP G130, G/F350, G/F370, G/F700, G/F900

Version
88-07-0x
Audience
anonymous
Part Number
MK-97HM85024-10

Example

Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Add Snapshot
++Snapshot Group=SSSSSSSS,Pool ID=A,
P-VOL(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
S-VOL(LDKC:CU:LDEV)=0x00:0xCC:0xDD,
Virtual Storage Machine S/N=423456,
Range=Group,S-VOL Storage Machine S/N=412345,
S-VOL Actual Controller ID=18,Add Mode=Cascade
Add Mode Option=AutoSplit,S-VOL Create=No,S-VOL Nickname=,
Resource Group ID=1,S-VOL ID Range Start(LDKC:CU:LDEV)=0x00:0xAA:0xBB,
S-VOL ID Range End(LDKC:CU:LDEV)=0x00:0xCC:0xDD,MU=127,SLU=Enable

Detailed Information

Item

Description

Command

The command name

Snapshot Group

The name of a snapshot group

Pool ID

The pool ID of a pool to which a pair to be registered belongs

P-VOL(LDKC:CU:LDEV)

The LDEV ID of the primary volume of a pair to be registered

When a virtual storage machine is specified, the volume number of the virtual storage machine is output.

S-VOL(LDKC:CU:LDEV)

The LDEV ID of the secondary volume of a pair to be registered

No output when a secondary volume is not specified

Virtual Storage Machine S/N

The serial number of the virtual storage machine

No output when a virtual storage machine is not specified

Range

The range for splitting pairs

Volume: Only the pair is split.

Group: All pairs in the group including the pair are split.

S-VOL Storage Machine S/N

The serial number of the actual storage system to which the secondary volume belongs

S-VOL Actual Controller ID

The controller ID of the actual storage system to which the secondary volume belongs

5: USP V/VM, 6: VSP, 7: VSP G1000/G1500 and VSP F1500, 18: VSP E series, VSP G130, G/F350, G/F370, G/F700, G/F900, VSP G200, G400, G600, G800, and VSP F400, F600, F800, 19: HUS VM

Add Mode

The mode of the pair to be registered

Cascade: cascade configuration, Clone: cloned pair

You can configure the cascade configuration, also when the "Clone" is specified.

Add Mode Option

Perform the cloned pair or the pair split operation automatically.

AutoClone: Perform the cloned pair automatically

AutoSplit: Perform the pair split operation

None: Not perform automatically

S-VOL Create

Create the secondary volume automatically or not

Yes: Create the secondary volume automatically

No: Not create the secondary volume automatically

S-VOL Nickname

The name to be designated on the secondary volume

The value is output only when S-VOL Create is Yes.

Resource Group ID

The resource group ID of the secondary volume

No value is output when the Resource Group ID is not specified.

S-VOL ID Range Start(LDKC:CU:LDEV)

Indicates the start LDEV ID for searching the secondary volume to be automatically numbered.

No value is output when the LDEV ID range of the secondary volume is not specified.

S-VOL ID Range End(LDKC:CU:LDEV)

Indicates the end LDEV ID for searching the secondary volume to be automatically numbered.

No value is output when the LDEV ID range of the secondary volume is not specified.

MU

The MU number

No value is output when the MU number is not specified.

SLU

Indicates whether the SLU attribute is specified for the snapshot data.

Enable: The SLU attribute is specified.

This item is output only when the SLU attribute is specified.