Add Ldev(Snapshot)

Audit Log User Guide for VSP E Series and VSP G130, G/F350, G/F370, G/F700, G/F900

Version
88-07-0x
Audience
anonymous
Part Number
MK-97HM85024-10

Example

Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Add Ldev(Snapshot)
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,Emulation=OPEN-V,
Size=200 Capacity,MP Blade ID=0,CLPR=1,T10PI=Disable

Detailed Information

Item

Description

Command

The command name

LDEV(LDKC:CU:LDEV)

The LDEV ID of an LDEV to be created

"Auto" indicates that auto numbering is enabled.

Emulation

The emulation type

Size

The capacity and method for specifying the capacity of an LDEV to be created

Specifying the capacity

  • Capacity: Specify a capacity by the byte or block.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Offset-Capacity: Specify a capacity by the byte or block, and then the storage system corrects the capacity.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Cylinder: Specify a capacity by the cylinder.
  • ALL Capacity: All free space is assigned to the LDEV capacity. The capacity value is not output.

For details, see the section describing CV size calculation in Provisioning Guide.

MP Blade ID

The MP unit ID of an LDEV to be created

CLPR

The CLPR ID

T10PI

The setting status of T10 PI attribute

Enable: Enabled, Disable: Disabled