Add Ldev

Audit Log User Guide for VSP E Series and VSP G130, G/F350, G/F370, G/F700, G/F900

Version: 88-07-0x
Audience: anonymous
Part Number: MK-97HM85024-10

Example

Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Add Ldev
++PG=1-1,LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,Emulation=OPEN-3,
Size=200 Capacity,Location=10000000,MP Blade ID=0,T10PI=Disable

Detailed Information

Item	Description
Command	The command name
PG	The parity group number to which an LDEV to be created belongs If the LDEV to be created is an external volume, "E" is added on the top of the external volume group number.
LDEV(LDKC:CU:LDEV)	The LDEV ID of the LDEV to be created "Auto" indicates that auto numbering is enabled.
Emulation	The type of emulation
Size	The capacity and method for specifying the capacity of an LDEV to be created Specifying the capacity Capacity: Specify a capacity by the byte or block. Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis. Offset-Capacity: Specify a capacity by the byte or block, and then the storage system corrects the capacity. Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis. Cylinder: Specify a capacity by the cylinder. ALL Capacity: All free space is assigned to the LDEV capacity. The capacity value is not output. For details, see the section describing CV size calculation in Provisioning Guide.
Location	The starting point of an LDEV to be created in the parity group or external volume group
MP Blade ID	The MP unit ID
T10PI	The setting status of T10 PI attribute Enable: Enabled, Disable: Disabled