Example
Out-of-band,,[Config Command],,,Accept,Seq.=xxxxxxxxxx +Command=Add External iSCSI Name/Modify External CHAP User ++Port=3B,iSCSI Name=iqn.1994-04.jp.co.hitachi:rsd.h8h.t.00001.4b000, TCP Port=3260,IP Address=192.168.0.169,CHAP User=user1, User Auth Switch=Enable,Auth Mode=Unidirectional,iSCSI Virtual Port ID=15
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Port |
The name of the port to which the iSCSI initiator belongs |
|
iSCSI Name |
The iSCSI name |
|
TCP Port |
The TCP port number If this item is not specified by the command option, the TCP port number of the iSCSI target on the port is output. |
|
IP Address |
The IP address of the port on the external system |
|
CHAP User |
The CHAP user name to be set for Secret When the iSCSI name of the external storage system is added, a hyphen (-) is output. |
|
User Auth Switch |
The setting status of CHAP authentication Enable: CHAP authentication is enabled. Disable: CHAP authentication is disabled. When the iSCSI name of the external storage system is changed, a hyphen (-) is output. |
|
Auth Mode |
The CHAP authentication mode Unidirectional: One-way CHAP authentication Mutual: Mutual-way CHAP authentication When the iSCSI name of the external storage system is changed, a hyphen (-) is output. |
|
iSCSI Virtual Port ID |
The iSCSI virtual port ID (0-15) No value is output when the option is not specified. |