Removing external iSCSI targets

Storage Advisor Embedded Guide

Part Number

Remove information about iSCSI targets on an external storage system.

  • The external paths using the external iSCSI targets to remove must not be attached to any external volume.
  • Check the iSCSI port to use for external connections.
  • Check the following information about the external storage system containing the volume to use for the quorum disk.
    • Name of the iSCSI target
    • IP address
  1. From the navigation bar, select Others > External Volumes.
  2. Click (External iSCSI Targets).
  3. Select the iSCSI port (local port) for external connections.
  4. To remove external iSCSI targets, select one or more external iSCSI targets, and then click (Remove External iSCSI Targets).