The following figure shows an example of part of a Physical Devices report. The actual report includes more columns of information. A record is created for each physical device. The table following the figure describes the items in the report.
The following table describes the items in a Physical Devices report.
|
Item |
Description |
|---|---|
| Location | Name of physical devices |
| CR# | C# and R# to define physical devices
Output as "XX/YY" |
| PG | Parity group of physical devices |
| Emulation Type | Parity group of physical devices |
| Drive type | Drive type of physical devices
|
| RPM |
Revolutions-per-minute (RPM) in the parity group
A hyphen (-) is displayed instead of the RPM when the drive type is an SSD. For VSP E990, this item is displayed as Interface. |
| Drive Type-Code | Type code of the drive in the parity group.
Output example: SLR5B- M200SS;SFB5A-M200SS; (if multiple drive types are set) |
| Drive Size |
Drive size (inches)
|
| Drive Capacity | Physical drive capacity (GB or TB) |
| Drive Version | Firmware version of the drive |
| DKB1 | Name of the DKB1 which controls the physical devices |
| DKB2 | Name of the DKB2 which controls the physical devices |
| Serial Number# |
Serial product number of the physical devices
|
| RAID Level | RAID level of the physical devices
|
| RAID Concatenation#0 | Number indicating a parity group #0 connected to this parity group
Output example: 2-1, 3-1, 4-1 |
| RAID Concatenation#1 | Number indicating a parity group #1 connected to this parity group
Output example: 2-1, 3-1, 4-1 |
| RAID Concatenation#2 | Number indicating a parity group #2 connected to this parity group
Output example: 2-1, 3-1, 4-1 |
| Resource Group Name | Name of resource group to which the parity group of physical devices belong |
| Resource Group ID | ID (0 to 1023 binary) |
| Encryption | Enable or disable status of the parity group to which the physical devices belong
|