Changing network communication settings

System Administrator Guide for VSP E990 and VSP G130, G/F350, G/F370, G/F700, G/F900

Part Number

This procedure explains how to configure a management client to use IPv6 for communication with an SVP.

  1. In the maintenance utility, click Administration to expand the Administration navigation pane.
  2. Click Network Settings.
    The Network Settings window displays the current network settings and permissions.
  3. In the Network Settings window, click Set Up Network Settings.
    The Network Settings dialog box displays the current settings for the Mac address, IPv4 and IPv6 settings, and the network connection mode for both controllers 1 and 2. It also displays the current settings for the maintenance port and the storage system internal network.
  4. Change the settings as needed and click Apply.

    The dialog box closes and returns you to the Network Settings window.

    Note: If you set items for DNS server, register the following items to the DNS server:
    • host name: localhost
    • IP address: