Alert Notifications window

System Administrator Guide for VSP E990 and VSP G130, G/F350, G/F370, G/F700, G/F900

Version
88-06-0x
Audience
anonymous
Part Number
MK-97HM85028-08


Summary

Item

Description

Notification Alert

Destination of the alert notification

  • Host Report: Sends alerts only of SIMs that report to hosts.
  • All: Sends alerts of all SIMs.

Alert destinations are common to Syslog, SNMP, and Email.

Email Notice

Failure notification setting

  • Enabled: Reports the SIM by email
  • Disabled: Does not report the SIM by email

Syslog Server Notice - Transfer Protocol

Protocol to transfer the syslog

  • TLS1.2/RFC5424
  • UDP/RFC3164

Syslog Server Notice - Primary Server

Whether to use the Syslog server

  • Enabled: Reports SIM to the Syslog Server through Syslog.
  • Disabled: Does not report SIM to the Syslog Server through Syslog

Syslog Server Notice - Secondary Server

Whether to use an alternate server for the Syslog server

  • Enabled: Reports SIM to the alternate Syslog server through Syslog.
  • Disabled: Does not report SIM to the alternate Syslog server through Syslog

SNMP Agent

Whether the SNMP agent is being used

  • Enabled: Reports the SIM through an SNMP trap

  • Disabled: Does not report the SIM through an SNMP trap

Set Up button

Displays the Set Up Alert Notifications window

Email tab

Item

Description

Mail Server

Mail server information (host name or IP address)

SMTP Authentication

Whether to perform SMTP authentication

  • Enabled: Performs SMTP authentication
  • Disabled: Does not perform SMTP authentication

SMTP Authentication - Account

SMTP Authentication account

Email Address - From

Source address of the email for failure information report

Email Address - Reply To

Return email address

Email Address - To

Destination address of the email for failure information report

Email Address - Cc

Carbon copy address of the email for failure information alert

Email Address - Bcc

Carbon copy address of the email for failure information alert

Send Test Email button

Sends a test SIM by email

Syslog tab



Item

Description

Primary Server - Host Name/IP Address

Host name or IP address of the Syslog server. To display the entire host name, click the button at the right of the field to expand the field.

Primary Server - Port Number

Port number of the Syslog server

Secondary Server - Host Name/IP Address

Host name or IP address of the alternate Syslog server. To display the entire host name, click the button at the right of the field to expand the field.

Secondary Server - Port Number

Port number of the alternate Syslog server

Location Identification Name

Identification name of the storage system to transfer the SIM to the Syslog server

Retry

Retry setting

  • Enable: Retry when communication with syslog server fails

  • Disable: Does not retry when communication with syslog server fails

Retry Interval

Retry interval when communication with the Syslog server fails

Send Test Message to Syslog Server button

Sends a test SIM by syslog

SNMP tab (SNMP v1 or v2c)



Item

Description

Storage System Name

Storage system name

Contact

Administrator name and contact information, such as personnel and telephone number where you can inquire about the storage system

Location

Location of the connected storage system

SNMP Engine ID

SNMP engine identifier

SNMP Version

SNMP protocol version

Sending Trap Setting

  • Community: Community names to which SNMP traps are reported
  • Send Trap to: IP address to which SNMP traps are reported

Request Authentication Setting

  • Community: Communities that have permission to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST
  • Requests Permitted: IP addresses that have permission to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST

Send Test SNMP Trap button

Sends a test trap to the IP address registered for the storage system

SNMP tab (SNMP v3)

Item

Description

Storage System Name

Storage system name

Contact

Administrator name and contact information, such as personnel and telephone number where you can inquire about the storage system

Location

Location of the connected storage system

SNMP Engine ID

SNMP engine identifier

SNMP Version

SNMP protocol version

Sending Trap Setting

  • Send Trap to: IP address to which SNMP traps are reported
  • User Name: User name used for reporting SNMP traps
  • Authentication - Mode: Whether authentication is enabled
  • Authentication - Protocol: Authentication method if authentication is enabled
  • Encryption - Mode: Whether encryption is enabled
  • Encryption - Protocol: Encryption method used if encryption is enabled

Request Authentication Setting

  • User Name: Users that have permission to execute GET REQUEST, GETNEXT REQUEST, and GETBULK REQUEST
  • Authentication - Mode: Whether authentication is enabled
  • Authentication - Protocol: Authentication method used if authentication is enabled
  • Encryption - Mode: Whether encryption is enabled
  • Encryption - Protocol: Encryption method used if encryption is enabled

Send Test SNMP Trap button

Sends a test trap to the IP address registered in the storage system