To connect the management client and the SVP through a firewall, configure the firewall so that the TCP/IP port for the protocol you use becomes available.
When attaching Device Manager - Storage Navigator to multiple storage systems, the installer must log in to the SVP of each storage system using separate Device Manager - Storage Navigator sessions and separate web browser instances.
When operating the management GUI directly from the SVP without using the management client, it is not necessary to register ports of protocols other than RMI, SLP, and SMI-S in the table below.
The type of the protocol and the port used is shown in the following table.
|
Protocol |
Port number |
Direction of communication |
|---|---|---|
|
HTTP |
80 |
From the Device Manager - Storage Navigator web client to the SVP |
|
HTTPS |
443 |
|
|
RMI |
1099 |
|
|
RMI (SSL) |
5443 |
|
|
RMI |
51099 |
|
|
RMI |
51100-51355 |
|
|
SLP |
427 |
|
|
SMI-S |
5989-6244 |