Disabling use of Flash Player with HDvM - SN

System Administrator Guide for VSP 5000 Series
Version
90-09-2x
Audience
anonymous
Part Number
MK-98RD9009-16

If desired, you can disable use of Flash Player with HDvM - SN after you start using HDvM - SN with Adobe AIR from HARMAN.

Note: If an alert about an SVP failover (SIM reference code: 7ff3xx) is issued within 24 hours after disabling use of Flash Player with HDvM - SN, check the setting and change it again if necessary. Depending on the timing of the SVP failover, this setting might not be saved in the SVP after the failover.
  • You must have the Storage Administrator (View & Modify) role to perform this task.
  1. On the management client, open a web browser.
  2. Open the Tool Panel on the SVP by specifying the following URL: 
    https://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
  3. Click Flash Disable/Enable.
  4. On the Login dialog box, enter the administrator user ID and password, and then click Login.
  5. In the Flash Disable/Enable dialog box, select Disable, and then click OK.
    If the Security Alert dialog box for the certificate opens before you are returned to the Login dialog box, click View Certificate, verify that the certificate is correct, and then click Yes.