The following table describes the items in the Physical Devices report.
| Item | Description |
|---|---|
| Location | PDEV name |
| CR# | C# and R# (2-digit hexadecimal numbers that identify the PDEV Output in the format XX/YY, where:
|
| PG | PDEVs parity group |
| Emulation Type | PDEVs emulation type |
| Drive Type | PDEVs drive type Output example: HDD, SCM, SSD |
| Interface | PDEVs control type Output example: SAS, SATA, NVMe |
| RPM | Revolutions per minute (unit: rpm) A hyphen (-) indicates that the drive is not a hard disk drive (HDD). |
| Drive Type-Code | Drive type code of the drive to which the parity group belongs Output example: SLB5E-M19RSS;SLB5G-M19RSS If multiple drive types are configured, they are separated by semicolons (;). |
| Drive Size | Drive size (inches) Output example: 2.5, 3.5 |
| Drive Capacity | Physical drive capacity (GB or TB) |
| Drive Version | Drive firmware version |
| DKB1 | Name of the DKB1 controlling the PDEV |
| DKB2 | Name of the DKB2 controlling the PDEV |
| DKB3 | Name of the DKB3 controlling the PDEV |
| DKB4 | Name of the DKB4 controlling the PDEV |
| Serial Number# | Serial number of this PDEV |
| RAID Level | RAID level of PDEVs Output example: RAID1(2D+2D), RAID5(7D+1P), RAID6(14D+2P) |
| RAID Concatenation#0 | Number of parity group (#0) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1 |
| RAID Concatenation#1 | Number of parity group (#1) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1 |
| RAID Concatenation#2 | Number of parity group (#2) being concatenated to Physical drive Output example: 2-1, 3-1, 4-1 |
| Resource Group Name | Name of the resource group to which the PDEV parity group belongs |
| Resource Group ID | ID of the resource group to which the PDEV parity group belongs (0 to 1023, decimal number) |
| Encryption | Encryption status of the parity group to which the PDEV belongs:
|