[PROV] Create LDEVs

Audit Log User Guide for VSP 5000 Series

Version
90-09-0x
Audience
anonymous
Part Number
MK-98RD9010-13

This log information is output when you create a Thin Image (HTI only) volume or DP-VOL. When you create an internal or external volume, CreateLdev is output.

Example 1: Creating Thin Image volumes

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,Task Name,
[PROV],Create LDEVs,Snapshot,Normal end,from=xxxx:xxxx:xxxx:xxxx:xxxx:
xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,LDKC:CU:LDEV,LDEVCapa(blocks),Emulation,CLPR,SSID,MP Blade ID,
T10 PI,Result}=
[{-,0x00:0x00:0x00,96000,OPEN-V,0,0x0004,Auto,Enable,Normal end},
{-,0x00:0x01:0x00,96000,OPEN-V,0,0x0005,Auto,Disable,Normal end}],
Num. of LDEVs=2

Example 2: Creating DP-VOLs

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,Task Name,
[PROV],Create LDEVs,Thin Provisioning,Normal end,from=xxxx:xxxx:xxxx:
xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,LDKC:CU:LDEV,LDEVCapa(blocks),Emulation,CLPR,SSID,MP Blade ID,
Attribute,Full Allocation,Data Direct Mapping,
Data Direct Mapped LDEV(LDKC:CU:LDEV),T10 PI,Capacity Saving,Compression Acceleration,Result}=
[{1,0x00:0x00:0x00,96000,OPEN-V,0,0x0004,Auto,-,Enable,Enable,
0x00:0x10:0x00,Enable,Compression,Normal end},
{1,0x00:0x01:0x00,96000,OPEN-V,0,0x0005,Auto,-,Disable,Disable,
-,Disable,Disabled,Normal end}],Num. of LDEVs=2

Basic Information for Example 1 and 2

Item

Description

Snapshot

Operating for the Thin Image (HTI only) volumes.

Thin Provisioning

Operating for the Dynamic Provisioning virtual volumes.

Detailed Information for Example 1 and 2

Item

Description

Pool ID

The pool ID of a related pool volume

For a Snapshot volume, a hyphen (-) is output, because you specify no setting about a related volume when you create V-Vols for Snapshot.

LDKC:CU:LDEV

The logical DKC, CU, and LDEV numbers of the created V-Vols

These numbers are separated by colons and arranged in this order.

LDEVCapa (blocks)

The capacity of the created V-Vols in blocks

Emulation

The emulation type of the created V-Vol

CLPR

The CLPR ID of the created V-Vol

SSID

The SSID

MP Blade ID

MP Blade ID specified for the V-Vol.

When an MP Blade ID is specified automatically, "Auto" is output.

Attribute

Indicates the attribute of the created V-VOLs.

TSE: TSE attribute, -: No attribute

This item is output for Dynamic Provisioning volumes only.

Full Allocation

Indicates the setting status of the Full Allocation

Enable: Full Allocation is enabled.

Disable: Full Allocation is disabled.

This item is output for Dynamic Provisioning volumes only.

Data Direct Mapping

Indicates the setting status of Data Direct Mapping for the created V-Vol

Enable: Data Direct Mapping is enabled.

Disable: Data Direct Mapping is disabled.

This item is output for Dynamic Provisioning volumes only.

Data Direct Mapped LDEV(LDKC:CU:LDEV)

Indicates the LDEV ID of the pool volume with Data Direct Mapping enabled that composes a pool associated with the created V-Vol

A hyphen (-) is output if Data Direct Mapping is disabled on the created V-Vol.

This item is output for Dynamic Provisioning volumes only.

T10 PI

Indicates the setting status of the T10 PI attribute

Enable: T10 PI is enabled.

Disable: T10 PI is disabled.

Capacity Saving

Indicates the setting status of Capacity Saving

Compression: Compression

Deduplication and Compression: Deduplication and Compression

Disabled: Capacity Saving is disabled.

Compression Acceleration

(This item is output for DKCMAIN firmware version 90-08-01-00/00 or later.)

Indicates the setting status of compression accelerator

Enable: Compression accelerator is enabled.

Disable: Compression accelerator is disabled.

Default: The setting status of compression accelerator is not specified. (This status is output when the Capacity Saving setting is Disabled.)

Result

The result of the operation

Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end

xxxx: Part code, yyyyy: Error code

Num. of LDEVs

The number of created V-Vols