Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,SVP,uid=user-name,, [Install],System Option,,Normal end, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Spare Disk Recover=Full Speed +Disk Copy Pace=Slower +Copy Operation(Correction Copy)=OFF +Copy Operation(Dynamic Sparing)=OFF +Link Failure Threshold=10 +{LDKC:CU:LDEV,Destage}=[{0x00:0x00:0x00,OFF}], Num. of LDEVs=1 +{LPR,Cache Tuning}=[{System,Level5}],Num. of LPRs=1 +{LPR,Command Control}=[{System,10}],Num.of LPRs=1 +{LPR,Mode,Set}=[{System,0,ON}],Num. of Modes=1 +Debug Mode=Set
Detailed Information
Item |
Description |
---|---|
Spare Disk Recover |
Indicates the setting status of Spare Disk Recover. Interleave: Give priority to the access from the host while executing copy process, Full speed: Give priority to the copy process. |
Disk Copy Pace |
Indicates the setting status of Disk Copy Pace. Slower: Low speed, Medium: Medium speed, Faster: High speed |
Copy Operation (Correction Copy) |
Indicates the setting status of Copy Operation (Correction Copy). ON: Execute Correction Copy, OFF: Do not execute Correction Copy |
Copy Operation (Dynamic Sparing) |
Indicates the setting status of Copy Operation (Dynamic Sparing). ON: Execute Dynamic Sparing, OFF: Do not execute Dynamic Sparing |
Link Failure Threshold |
The threshold to report link failure |
LDKC:CU: LDEV |
The LDKC number, the CU number, and the LDEV number |
Destage |
Indicates the setting status of Destage. ON: Execute write through operation (report the completion of the writing to the host after the writing to the disk drive has completed). OFF: Do not execute write through operation (report the completion of the writing to the host when the data is written in the cache memory). |
Num. of LDEVs |
The number of LDEVs |
LPR |
The LPR name |
Cache Tuning |
The level of Cache Tuning |
Num. of LPRs |
The number of LPRs |
Command Control |
Command Control |
Mode |
The local mode number |
Set |
The setting status. ON: Set, Off: Release |
Num. of Modes |
The number of local modes. |
Debug Mode |
Setting executed from the debug window (Set: fix). |
Note: Only the changed items will be output. |