Extend Ldev(Asynchronous)

Audit Log User Guide for VSP 5000 Series

Version
90-09-0x
Audience
anonymous
Part Number
MK-98RD9010-13

Example

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Extend Ldev(Asynchronous)
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,Virtual Storage Machine S/N=23456,
Size=200 Capacity

Detailed Information

Item

Description

Command

The command name

LDEV(LDKC:CU:LDEV)

The LDEV ID of the Dynamic Provisioning virtual volume to be extended asynchronously with the operation

When a virtual storage machine is specified, the LDEV ID of the virtual storage machine is output.

Virtual Storage Machine S/N

The serial number of the virtual storage machine

No value is output when a virtual storage machine is not specified.

Size

The capacity of an LDEV to be created, and how the capacity is specified

How the capacity is specified

  • Capacity: The capacity is specified by the byte or block.

    Units, byte or block, are not output. If the capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Offset-Capacity: The capacity is specified by the byte or block, and the storage system corrects the capacity.

    Units, byte or block, are not output. If the capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Cylinder: The capacity is specified by the cylinder.

For details, see the section describing CV size calculation in Provisioning Guide for Open Systems.