EST PAIR

Audit Log User Guide for VSP 5000 Series

Version
90-09-0x
Audience
anonymous
Part Number
MK-98RD9010-13

Example 1: when the copy type is SIMF

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=EST PAIR ++P-VOL(LDEV)=0x03,S-VOL(LDEV)=0x02,MCU S/N=30176,MCU SSID=0xC804,
RCU S/N=30176,RCU SSID=0xC805,Copy Type=SIMF,Copy Msg=, S-VOL Write=Enable,Online
Chk=Disable,Force=, Initial Copy=None(Suspend),NoDelay=Disable,Copy
Pace=Normal

Example 2: when the copy type is TCMF

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=EST PAIR
++P-VOL(LDEV)=0x02,S-VOL(LDEV)=0x02,MCU S/N=30176,MCU SSID=0xC804, RCU S/N=30179,RCU
SSID=0xC805,Copy Type=TCMF,Copy Msg=Disable, Fence Level=Never,Online
Chk=Disable,,Force=Disable, Initial Copy=Diff,S-VOL Wr(PSUE)=Enable,NoDelay=Disable,
Copy Pace=High

Detailed Information

Item

Description

Output items common to Example 1 and Example 2

Command

The command name

P-VOL(LDEV)

The LDEV number of the primary volume

S-VOL(LDEV)

The LDEV number of the secondary volume

MCU S/N

The serial number of the local storage system

MCU SSID

The SSID to which a volume on the local storage system belongs

The SSID to which the primary volume belongs for operating ShadowImage for Mainframe pairs

RCU S/N

The serial number of the remote storage system

The same value as MCU S/N is output for operating ShadowImage for Mainframe pairs

RCU SSID

The SSID to which a volume on the remote storage system belongs

The SSID to which the secondary volume belongs for operating ShadowImage for Mainframe pairs

Copy Type

The program product name

SIMF: ShadowImage for Mainframe, TCMF: TrueCopy for Mainframe

Output items when Copy Type is SIMF

Copy Msg

The setting status of the message request

Enable: Enabled, Disable: Disabled

No value is output when Initial Copy is None(Suspend).

S-VOL Write

Indicates whether the writing to the secondary volume after the suspend is enabled

Enable: Enabled, Disable: Disabled

No value is output when Initial Copy is not None(Suspend).

Online Chk

The setting status of the online check

Enable: Enabled, Disable: Disabled

Force

The setting status of the pair forcible recovery when the pair status is suspending

Enable: Enabled, Disable: Disabled

No value is output when Initial Copy is not Diff.

Initial Copy

The type of the pair creation operation

None(Suspend): Creates pairs and suspends them without copying data from the primary volume to the secondary volume.

Entire: Creates pairs and copies data from the primary volume to the secondary volume.

Diff: Copies the difference between the primary volume and the secondary volume

NoDelay

The setting status of NoDelay

Enable: Enabled, Disable: Disabled

Copy Pace

The copy speed

Slow: Low, Normal: Normal

Output items when Copy Type is TCMF

Copy Msg

The setting status of the message request

Enable: Enabled, Disable: Disabled

No value is output when Initial Copy is None.

Fence Level

The fence level to be set (conditions where the local storage system rejects write operations to the primary volume)

Never: Can write to the primary volume even if the pair is split.

Status: Cannot write to the primary volume only when the storage system of the primary site cannot change the pair status of the secondary volume to PSUE

Online Chk

The setting status of the online check

Enable: Enabled, Disable: Disabled

Blank item

Nothing is output due to unused.

Force

The setting status of the pair forcible recovery when the pair is in suspending status

Enable: Enabled, Disable: Disabled

No value is output when Initial Copy is Diff.

Initial Copy

The type of the pair creation operation

None: Creates pairs but does not copy data from the primary volume to the secondary volume

Entire: Creates pairs and copies data from the primary volume to the secondary volume.

Diff: Copies the difference between the primary volume and the secondary volume

None(Suspend): Creates pairs and suspends them without copying data from the primary volume to the secondary volume.

S-VOL Wr(PSUE)

Indicates whether the writing to the secondary volume is enabled at the pair suspended error

Enable: Enabled, Disable: Disabled

NoDelay

The setting status of NoDelay

Enable: Enabled, Disable: Disabled

Copy Pace

The copy speed

High: High speed

Low: Low speed

Default: Normal speed