Edit Audit Log Settings window

Transfer Protocol

Selects a protocol to transfer the audit log.

• New Syslog Protocol (TLS1.2/RFC5424)
• Old Syslog Protocol (UDP/RFC3164)

Primary Server

Selects whether to use the syslog server.

• Enable: Transfers the audit log to the syslog server.
• Disable: Do not transfer the audit log to the syslog server.

Primary Server- Server settings

Specify the IPv4 address, IPv6 address, or host name of the server that you want to configure as the syslog server. To specify the host name, select Identifier and then enter up to 255 characters of alphabets, numerals, and symbols (! $ % - . @ _ ` ~).

Primary Server- Port Number

Enters a port number to be used at the syslog server.

Primary Server- Client Certificate File Name

Specifies a certificate file. Click Browse, and then specify a certificate file.

Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at Transfer Protocol.

Primary Server- Password

Enters a password for the client certificate. Up to 128 characters can be entered for the password.

Allowed characters are alphanumeric characters and symbols: ! # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~.

Inputs this item only when Client Certificate File Name is specified.

Primary Server- Root Certificate File Name

Specifies a certificate file. Click Browse, and then specify a certificate file.

Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at Transfer Protocol.

Secondary Server

Selects whether to use an alternative server (secondary server) to the syslog server.

• Enable: Transfers the audit log to the secondary server.
• Disable: Do not transfer the audit log to the secondary server.

Secondary Server- Server Setting

Enters an IP address or a host name of a server you want to set as a secondary server. The restriction for the available values is the same as that of Primary Server- Server Setting.

Secondary Server- Port Number

Enters a port number to be used on the secondary server.

Secondary Server- Client Certificate File Name

Specifies a certificate file. Click Browse, and then specify a certificate file.

Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at Transfer Protocol.

Secondary Server- Password

Enters a password for the client certificate. Up to 128 characters password can be entered.

The restriction for the available values is the same as that of Primary Server- Server Setting.

Secondary Server- Root Certificate File Name

Specifies a certificate file. Click Browse, and then specify a certificate file.

Specifies this item only when New Syslog Protocol (TLS1.2/RFCS5424) is selected at Transfer Protocol.

Location Identification Name

Enters an arbitrary name for the storage system that transfers the audit log to the syslog servers, so that you can identify the storage system. Enter 32 characters at the maximum. Allowed characters are alphanumeric characters and symbols: ! " # $ % & ' ( ) * + - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~. A comma (,) and a space cannot be used.

Timeout

Enters the time to detect the timeout of communication with the syslog server in the range of 1 to 120 seconds. The default is 10 seconds.

Inputs this item only when New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol is specified.

Retry Interval

Enters the retry interval when the communication with the syslog server fails in the range of 1 to 60 seconds. The default is 1 second.

Inputs this item only when New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol is specified.

Number of Retries

Enters the number of retry times when the communication with the syslog server fails in the range of 1 to 50. The default is 3.

Inputs this item only when New Syslog Protocol (TLS1.2/RFC5424) at Transfer Protocol is specified.

Output Detailed Information

Selects whether to transfer the detailed information of the audit log to the syslog server.

• Enable:Transfer the detailed information to the syslog server.
• Disable: Do not transfer the detailed information to the syslog server.

In the syslog file that is stored in the SVP, the detailed information is always stored regardless of this setting.

Download Syslog

Downloads the syslog file to the Device Manager - Storage Navigator computer.

Send Test Message to Syslog Server

Sends the test log to the syslog server.

Reset Settings

Cancel the change within tab.

Primary Server

Selects whether to use the FTP server.

• Enable: Transfers the audit log file to the FTP server.
• Disable: Do not transfer the audit log file to the FTP server.

Primary Server- IP Address

Sets an IP address for the primary FTP server. You can set either IPv4 address or IPv6 address for IP address.

• To set an IPv4 address, select IPv4 and enter four integers in the range of 0 to 255 (for example, nnn.nnn.nnn.nnn, where n is a number).
• To set an IPv6 address, select IPv6 and enter eight hexadecimal alphanumeric in the range of 0 to FFFF. (for example, hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh, where h is a hexadecimal digit). An abbreviated style of IPv6 address can also be specified.

Primary Server- Login User

Sets the user name and password to log in to the primary FTP server. Enter up to 255 alphanumeric characters and symbols (ASCII codes) for user name and password.

Primary Server- Output Folder

Specifies the folder location to save the audit log file. The folder location should be relative to a home directory of a FTP server user. The default setting (/) is the home directory. Enter up to 256 alphanumeric characters and symbols (ASCII codes) for the output folder.

Secondary Server

Selects whether to use an alternative server (secondary server) to the FTP server.

• Enable: Transfers the audit log file to the secondary FTP server.
• Disable: Do not transfer the audit log file to the secondary FTP server.

Secondary Server- IP Address

Enters an IP address of a server you want to set as a secondary FTP server. The restriction for the available values is the same as that of Primary Server- IP Address.

Secondary Server- Login User

Sets the user name and password to log in to the secondary FTP server. The restriction for the available values is the same as that of Primary Server- Login User.

Secondary Server- Output Folder

Specifies the secondary FTP server folder location to save the audit log file. The restriction for the available values is the same as that of Primary Server- Output Folder.

Complete SIMs

Completes (resolve) the SIM that occurred when transferring audit logs to any FTP servers fails. Resolve the error condition, manually transfer the audit log file by clicking Transfer to Primary Server or Transfer to Secondary Server, and then complete the SIM. The SIM status will change to Completed.

Important: If you do not complete the SIM, the SIM will not occur when an FTP transfer fails next time.

Transfer to Primary Server

The audit log file is transferred to the primary FTP server. You can transfer the current audit log file without waiting to reach the threshold value with the automatic transfer.

Transfer to Secondary Server

The audit log file is transferred to the secondary FTP server. You can transfer the current audit log file without waiting to reach the threshold value with the automatic transfer.

Reset Settings

Cancel the change within tab.