[PROV] Create/Expand Pools

Audit Log User Guide for VSP 5000 Series

Version
90-08-8x
Audience
anonymous
Part Number
MK-98RD9010-12

Example

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,
Task Name,[PROV],Create/Expand Pools,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,Pool Type,Multi Tier Pool,Warning Threshold(%), Depletion Threshold(%),Subscription
Limit(%), Protect V-VOLs when I/O fails to Blocked Pool VOL, Protect V-VOLs when I/O
fails to Full Pool, Tier Management,Cycle Time,Monitoring Period,Monitoring Mode,
Relocation Speed,Data Direct Mapping,Suspend TI pairs when depletion threshold is exceeded,
Automatically manage compressed space from FMD parity group,
PoolResult,Execute Command} =[{1,Dynamic Provisioning,
Enable,20,70,100,Yes,Yes,Auto,24,00:00-23:59,Continuous Mode,3,Disable,Yes,Disable,Normal
end,Create}], Num. of Pools=1
++{LDKC:CU:LDEV,External LDEV Tier Rank,LDEV Result}
=[{0x00:0x00:0x00,Middle/Internal,Normal end},
{0x00:0x00:0x01,Middle/Internal,Normal end}, {0x00:0x00:0x02,Middle/Internal,Normal
end}],Num. of LDEVs=3

Detailed Information

Item

Description

Pool ID

The pool ID of the created or expanded pool

Pool Type

The pool type.

Dynamic Provisioning: Dynamic Provisioning, Thin Image: Thin Image

Multi Tier Pool

The setting status of the multi-tier mode and active flash function for the created or expanded pool

Enable(Active Flash): Both Dynamic Tiering and active flash are enabled.

Enable: Dynamic Tiering is enabled and active flash is disabled.

Disable: Both Dynamic Tiering and active flash are disabled.

If Pool Type is Thin Image, a hyphen (-) is output.

Warning Threshold(%)

The warning threshold of the usage rate of the created pool.

The unit is indicated as a percentage.

If Execute Command is Expand, a hyphen (-) is output.

Depletion Threshold(%)

The depletion threshold of the usage rate of the created pool.

The unit is indicated as a percentage.

If Pool Type is Thin Image, if the depletion threshold is not specified, or if Execute Command is Expand, a hyphen (-) is output.

Subscription Limit(%)

The reserve amount of the created pool.

The unit is percent (%).

If the reserve amount is not specified, it outputs "Unlimited".

If Pool Type is Thin Image, or if Execute Command is Expand, a hyphen (-) is output.

Protect V-VOLs when I/O fails to Blocked Pool VOL

Indicates whether the setting of the protect access attribute on the virtual volume is enabled or disabled when the pool is blocked.

Yes: Enabled, No: Disabled

If Pool Type is not Dynamic Provisioning, or if the pool is not a pool for an open system, or if Execute Command is Expand, a hyphen (-) is output.

Protect V-VOLs when I/O fails to Full Pool

Indicates whether the setting of the protect access attribute on the virtual volume is enabled or disabled when the pool is full.

Yes: Enabled, No: Disabled

If Pool Type is not Dynamic Provisioning, or if the pool is not a pool for an open system, or if Execute Command is Expand, a hyphen (-) is output.

Tier Management

The auto control mode of the created or expanded pool

Auto: Auto, Manual: Manual

If Multi Tier Pool is not Enable, a hyphen (-) is output.

Cycle Time

The cycle of performance monitoring for the created pool

0.5: every thirty minutes, 1: every one hour, 2: every two hours, 4: every four hours, 8: every eight hours, 24: every twenty-four hours

If Tier Management is not Auto, or if Execute Command is Expand, a hyphen (-) is output.

Monitoring Period

The monitoring period of the pool.

Format: "H1:M1-H2:M2" H1: The time when the monitoring starts (hour) M1: The time when the monitoring starts (minute) H2: The time when the monitoring ends (hour) M2: The time when the monitoring ends (minute).

If Cycle Time is not 24, or if Execute Command is Expand, a hyphen (-) is output.

Monitoring Mode

The monitoring mode

Continuous Mode: Continuous mode, Period Mode: Period mode

If Multi Tier Pool is not Enable, or if Execute Command is Expand, a hyphen (-) is output.

Relocation Speed

The relocation speed

1: Slowest, 2: Slower, 3: Normal, 4: Faster, 5: Fastest

If Multi Tier Pool is not Enable, or if Execute Command is Expand, a hyphen (-) is output.

Data Direct Mapping

Indicates the setting status of Data Direct Mapping

Enable: Data Direct Mapping is enabled.

Disable: Data Direct Mapping is disabled.

If Execute Command is Expand, a hyphen (-) is output.

Suspend TI pairs when depletion threshold is exceeded

Indicates the setting status of Suspend Thin Image pairs when depletion threshold is exceeded

Yes: Suspend Thin Image pairs is enabled when the depletion threshold is exceeded.

No: Suspend Thin Image pairs is disabled even if the depletion threshold is exceeded.

If Execute Command is Expand, a hyphen (-) is output.

Automatically manage compressed space of FMD parity group

Indicates the setting status of automatically manage compressed space of FMD parity group

Enable: Automatically manage compressed space of FMD parity group is enabled.

Disable: Automatically manage compressed space of FMD parity group is disabled.

If Execute Command is Expand, a hyphen (-) is output.

Pool Result

The result of pool creation or expansion

Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not Executed

xxxx: Part code, yyyyy: Error code

Execute Command

The executed operation

Create: Pools are created.

Expand: Pools are expanded.

If Pool Result is not Normal end, a hyphen (-) is output.

Num. of Pools

The number of created or expanded pools

LDKC:CU:LDEV

The LDKC number, the CU number and the LDEV number of the pool volume assigned to the created or expanded pool

External LDEV Tier Rank

The external LDEV tier rank of the pool volume assigned to the created or expanded pool

High: An external volume (High)

Middle/Internal: An external volume (Middle) or an internal volume

Low: An external volume (Low)

LDEV Result

The result of creating or expanding pools per pool volume

Normal end: Normal end, Error(xxxx-yyyy): Abnormal end, Not Execute: Not Executed

xxxx: Part code, yyyy: Error code

Num. of LDEVs

The number of created or expanded pool volume