This log information is output when you create a Thin Image volume or DP-VOL. When you create an internal or external volume, CreateLdev is output.
Example 1: Creating Thin Image volumes
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,Task Name,
[PROV],Create LDEVs,Snapshot,Normal end,from=xxxx:xxxx:xxxx:xxxx:xxxx:
xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,LDKC:CU:LDEV,LDEVCapa(blocks),Emulation,CLPR,SSID,MP Blade ID,
T10 PI,Result}=
[{-,0x00:0x00:0x00,96000,OPEN-V,0,0x0004,Auto,Enable,Normal end},
{-,0x00:0x01:0x00,96000,OPEN-V,0,0x0005,Auto,Disable,Normal end}],
Num. of LDEVs=2
Example 2: Creating DP-VOLs
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,Task Name,
[PROV],Create LDEVs,Thin Provisioning,Normal end,from=xxxx:xxxx:xxxx:
xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Pool ID,LDKC:CU:LDEV,LDEVCapa(blocks),Emulation,CLPR,SSID,MP Blade ID,
Attribute,Full Allocation,Data Direct Mapping,
Data Direct Mapped LDEV(LDKC:CU:LDEV),T10 PI,Capacity Saving,Compression Acceleration,Result}=
[{1,0x00:0x00:0x00,96000,OPEN-V,0,0x0004,Auto,-,Enable,Enable,
0x00:0x10:0x00,Enable,Compression,Normal end},
{1,0x00:0x01:0x00,96000,OPEN-V,0,0x0005,Auto,-,Disable,Disable,
-,Disable,Disabled,Normal end}],Num. of LDEVs=2
Basic Information for Example 1 and 2
|
Item |
Description |
|---|---|
|
Snapshot |
Operating for the Thin Image volumes. |
|
Thin Provisioning |
Operating for the Dynamic Provisioning virtual volumes. |
Detailed Information for Example 1 and 2
|
Item |
Description |
|---|---|
|
Pool ID |
The pool ID of a related pool volume For a Snapshot volume, a hyphen (-) is output, because you specify no setting about a related volume when you create V-Vols for Snapshot. |
|
LDKC:CU:LDEV |
The logical DKC, CU, and LDEV numbers of the created V-Vols These numbers are separated by colons and arranged in this order. |
|
LDEVCapa (blocks) |
The capacity of the created V-Vols in blocks |
|
Emulation |
The emulation type of the created V-Vol |
|
CLPR |
The CLPR ID of the created V-Vol |
|
SSID |
The SSID |
|
MP Blade ID |
MP Blade ID specified for the V-Vol. When an MP Blade ID is specified automatically, "Auto" is output. |
|
Attribute |
Indicates the attribute of the created V-VOLs. TSE: TSE attribute, -: No attribute This item is output for Dynamic Provisioning volumes only. |
|
Full Allocation |
Indicates the setting status of the Full Allocation Enable: Full Allocation is enabled. Disable: Full Allocation is disabled. This item is output for Dynamic Provisioning volumes only. |
|
Data Direct Mapping |
Indicates the setting status of Data Direct Mapping for the created V-Vol Enable: Data Direct Mapping is enabled. Disable: Data Direct Mapping is disabled. This item is output for Dynamic Provisioning volumes only. |
|
Data Direct Mapped LDEV(LDKC:CU:LDEV) |
Indicates the LDEV ID of the pool volume with Data Direct Mapping enabled that composes a pool associated with the created V-Vol A hyphen (-) is output if Data Direct Mapping is disabled on the created V-Vol. This item is output for Dynamic Provisioning volumes only. |
|
T10 PI |
Indicates the setting status of the T10 PI attribute Enable: T10 PI is enabled. Disable: T10 PI is disabled. |
|
Capacity Saving |
Indicates the setting status of Capacity Saving Compression: Compression Deduplication and Compression: Deduplication and Compression Disabled: Capacity Saving is disabled. |
|
Compression Acceleration (This item is output for DKCMAIN firmware version 90-08-01-00/00 or later.) |
Indicates the setting status of compression accelerator Enable: Compression accelerator is enabled. Disable: Compression accelerator is disabled. Default: The setting status of compression accelerator is not specified. (This status is output when the Capacity Saving setting is Disabled.) |
|
Result |
The result of the operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code |
|
Num. of LDEVs |
The number of created V-Vols |