Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Command=Paircreate(RemoteCopy) ++Copy Kind=Remote
++P-VOL(Port-LUN-LDEV)=1A-2047-0x1A, S-VOL(Port-LUN-LDEV)=1B-3-0x3B, MCU
S/N=12345,MCU SSID=0x6500,RCU S/N=22364,RCU SSID=0x3001, Virtual Storage Machine
S/N=23456, Write Permission(Update Copy Error)=Enable, Write Permission(RCU Suspend
Failure)=Enable, Initial Copy=None,Copy Pace(TRK)=1,JNL ID Option=Disable, CTG
ID=100,CTG Mode(Multi)=Disable, Paircreate Mode(Diff)=Normal,CTG Option=Enable, CTO
Option=Enable,Inflow Control=Disable,Offloading Timer(s)=, M-JNL=,R-JNL=,Quorum Disk
ID=,Device Option=Enable,IO Preference Mode=
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Copy Kind |
The remote copy Remote is output as the fixed value. |
|
P-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the primary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2> of Command Control Interface |
|
S-VOL(Port-LUN-LDEV)*1 |
The port number, the LU number, and the LDEV number of the secondary volume The port number and the LU number show the expanded LU of Command Control Interface The LU number is the absolute LUN*2 of Command Control Interface |
|
MCU S/N*1 |
The serial number of the local storage system |
|
MCU SSID*1 |
The SSID to which a volume on the local storage system belongs |
|
RCU S/N*1 |
The serial number of the remote storage system |
|
RCU SSID*1 |
The SSID to which a volume on the remote storage system belongs |
|
Virtual Storage Machine S/N |
The serial number of the virtual storage machine No value is output when a virtual storage machine is not specified. |
|
Write Permission(Update Copy Error) |
The setting status of write permission if an error occurs during update copy Enable: Enabled, Disable: Disabled |
|
Write Permission(RCU Suspend Failure) |
The setting status of permission to write to the local storage system if the suspension operation cannot be performed on the remote storage system Enable: Enabled, Disable: Disabled |
|
Initial Copy |
The type of pair creation Entire: Creates pairs and copies data from the primary volume to the secondary volume None: Creates pairs and does not copy data from the primary volume to the secondary volume |
|
Copy Pace(TRK) |
The track size for copy |
|
JNL ID Option |
Indicates whether an option (-jp or -js) is specified for a journal ID Enable: Specified, Disable: Not specified Disable is output for pairs other than Universal Replicator ones |
|
CTG ID |
The consistency group ID 0 (zero) is output if the consistency group option (-fg) is not specified. |
|
CTG Mode(Multi) |
Indicates whether pairs are specified for consistency groups across multiple storage systems Enable: Specified, Disable: Not specified Disable is output for pairs other than Universal Replicator ones. |
|
Paircreate Mode(Diff) |
The pair creation mode Normal: Normal mode, Diff: Difference mode Normal is output for pairs other than Universal Replicator ones. |
|
CTG Option |
Indicates whether the consistency group option (-fg) is specified Enable: Specified, Disable: Not specified |
|
CTO Option |
Indicates whether the CTO option (-cto) is specified Enable: Specified, Disable: Not specified |
|
Inflow Control |
The setting status of the inflow control mode Enable: Enabled, Disable: Disabled No value is output when the CTO option is not specified. |
|
Offloading Timer(s) |
The time out value for the inflow control in seconds No value is output when the CTO option is not specified or the inflow control mode is disabled. |
|
M-JNL |
The master journal number No value is output for pairs other than Universal Replicator ones. |
|
R-JNL |
The restore journal number No value is output for pairs other than Universal Replicator ones. |
|
Quorum Disk ID |
The Quorum Disk ID No value is output for pairs other than global-active device ones. |
|
Device Option |
Indicates whether the volume name defined in the configuration definition file is used Enable: Used, Disable: Not used |
|
IO Preference Mode |
I/O preference mode for when a failure occurs on the remote path between the primary and secondary storage systems (I/O preference mode for remote path failure). A value is displayed when the I/O preference mode for remote path failure is specified. P-VOL: Primary volume preference mode |
|
*1 When a virtual storage machine is specified, the value of the virtual storage machine is output. *2 For more information about the absolute LUN, see Command Control Interface Installation and Configuration Guide |
|