Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,, [Config Command],,,Accept, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Modify Pool(Threshold) ++Pool ID=10,Warning Threshold(%)=85, High water mark Threshold(%)=85,Subscription(%)=65530, Monitor Mode=-,Blocking Mode=pool_full
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
Pool ID |
The pool ID of a pool whose threshold is to be changed |
|
Warning Threshold(%) |
The warning threshold of the usage rate of a pool |
|
High water mark Threshold(%) |
The depletion threshold of the usage rate of a pool |
|
Subscription(%) |
The maximum reserve rate of virtual volumes for the pool capacity Unlimited is output as a value when the reserve rate is unlimited. |
|
Monitor Mode |
The monitor mode period: Monitoring periodically continuous: Monitoring continuously realtime_tiering: The active flash function is enabled. non_realtime_tiering: The active flash function is disabled. A hyphen (-) is output for the value when Blocking Mode option is specified. |
|
Blocking Mode |
The blocking mode pool_full: Read and write to the virtual volume are not available when the pool is full. When the pool is blocked, read and write to the virtual volume are available. pool_vol_blockade: Read and write to the virtual volume are not available when the pool is blocked. When the pool is full, read and write to the virtual volume are available. full_or_blockade: Read and write to the virtual volume are not available when the pool is full or blocked. no_blocking: Read and write to the virtual volume are available even if the pool is full or blocked. |