Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,
[Config Command],,,Accept,Seq.=xxxxxxxxxx
+Command=Modify Ldev(QoS Parameters)
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,Upper Throughput IO=2147483647,Upper
Data Trans MB=2097151,Lower Throughput IO=-,Lower Data Trans
MB=-,Response Priority=3
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
LDEV(LDKC:CU:LDEV) |
The LDEV ID of an LDEV for which QoS parameters are to be set, changed, or deleted |
|
Upper Throughput IO |
The upper-limit value of the throughput per second If this value is not specified, a hyphen (-) is output. If the value is 0, the upper-limit value is not valid. |
|
Upper Data Trans MB |
The upper-limit value (MB) of the amount of data transfer per second If this value is not specified, a hyphen (-) is output. If the value is 0, the upper-limit value is not valid. |
|
Lower Throughput IO |
The lower-limit value of the I/O rate (IOPS) If the lower-limit value is not specified, a hyphen (-) is output. If the lower-limit value is disabled, 0 is output. |
|
Lower Data Trans MB |
The lower-limit value of the transfer rate (MB/s) If the lower-limit value is not specified, a hyphen (-) is output. If the lower-limit value is disabled, 0 is output. |
|
Response Priority |
The priority of the I/O processing If the priority is not specified, a hyphen (-) is output. If the priority is disabled, 0 is output. |