Extend Ldev

Audit Log User Guide for VSP 5000 Series

Version
90-08-8x
Audience
anonymous
Part Number
MK-98RD9010-12

Example

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx 
+Command=Extend Ldev
++LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB, Virtual Storage Machine S/N=23456,Size=200 Capacity

Detailed Information

Item

Description

Command

The command name

LDEV(LDKC:CU:LDEV)

The LDEV ID of the virtual volume for Dynamic Provisioning to be extended

When a virtual storage machine is specified, the LDEV ID of the virtual storage machine is output.

Virtual Storage Machine S/N

The serial number of the virtual storage machine

No value is output when a virtual storage machine is not specified.

Size

The capacity and method for specifying the capacity of an LDEV to be created

Specifying the capacity

  • Capacity: Specify a capacity by the byte or block.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Offset-Capacity: Specify a capacity by the byte or block, and then the storage system corrects the capacity.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Cylinder: Specify a capacity by the cylinder.

For details, see the section describing CV size calculation in Provisioning Guide for Open Systems.