Add Ldev(Dynamic Provisioning)

Audit Log User Guide for VSP 5000 Series

Version
90-08-8x
Audience
anonymous
Part Number
MK-98RD9010-12

Example

09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,
[Config Command],,,Accept,from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,
Seq.=xxxxxxxxxx
+Command=Add Ldev(Dynamic Provisioning)
++Pool ID=127,LDEV(LDKC:CU:LDEV)=0x00:0xAA:0xBB,SSID=0x6500,
Emulation=OPEN-V,Size=200 Capacity,MP Blade ID=0,CLPR=1,
TSE=Enable,Full Allocation=Enable,
Data Direct Mapping LDEV(LDKC:CU:LDEV)=,T10PI=Enable,
Capacity Saving=Deduplication Compression,
Capacity Saving Mode=Post Process,Nickname=AAAAAAAAAA,
Compression Acceleration=Enable

Detailed Information

Item

Description

Command

The command name

Pool ID

The pool number of a pool to which a virtual volume of Dynamic Provisioning to be created belongs

No value is output when the data direct mapping attribute is enabled.

LDEV(LDKC:CU:LDEV)

The LDEV ID of an LDEV to be created

"Auto" indicates the auto numbering is enabled.

SSID

The SSID

Emulation

The type of emulation

Size

The capacity and method for specifying the capacity of an LDEV to be created

Specifying the capacity

  • Capacity: Specify a capacity by the byte or block.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Offset-Capacity: Specify a capacity by the byte or block, and then the storage system corrects the capacity.

    Units, byte or block, are not output. If a capacity is specified by the kilobyte, megabyte, gigabyte, or terabyte, the capacity is output on a byte basis.

  • Cylinder: Specify a capacity by the cylinder.
  • ALL Capacity: All free space is assigned to the LDEV capacity. The capacity value is not output.

For details, see the section describing CV size calculation in Provisioning Guide for Open Systems.

MP Blade ID

The MP blade ID of an LDEV to be created

CLPR

The CLPR ID

TSE

The setting status of TSE attribute

Enable: Enabled, Disable: Disabled

Full Allocation

The setting status of the full allocation

Enable: Enabled, Disable: Disabled

Data Direct Mapping LDEV(LDKC:CU:LDEV)

The LDEV ID of a pool volume with the data direct mapping attribute when the data direct mapping attribute is enabled.

No value is output when the data direct mapping attribute is disabled.

T10PI

The setting status of T10 PI attribute

Enable: Enabled, Disable: Disabled

Capacity Saving

The status of the capacity saving setting

Disable: Capacity saving is disabled, Compression: Compression, Deduplication Compression: Deduplication and compression

Capacity Saving Mode

The status of the capacity saving setting mode

Post Process: post process method, Inline: inline method

If the option is not specified, a hyphen (-) is output.

Nickname

The name to be set for the LDEV

No value is output if no name is specifed for the LDEV.

Compression Acceleration

The setting status of compression accelerator

Enable: Compression accelerator is enabled.

Disable: Compression accelerator is disabled.

This item is output when compression accelerator is set.