Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,
[Config Command],,,Accept,from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,
Seq.=xxxxxxxxxx
+Command=Add External Group
++PG=E11111-1,Port=1A,WWN=AAAAAAAA,Path Group ID=1,LUN=1,
Emulation=xxxxxxxx,Migration=Enable,CLPR=3,
Data Direct Mapping=Enable,Command Device= Enable,
LDEV(LDKC:CU:LDEV)=0x00:0xFE:0xFF,Add LDEV Mode=Enable,Resource Group
ID=0,Safety Check=Enable
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
PG |
The external volume group number |
|
Port |
The port name of the storage system (connection source) |
|
WWN |
The WWN of the storage system (connection target) |
|
Path Group ID |
The path group ID |
|
LUN |
The LU number of the external volume |
|
Emulation |
The emulation type of the mapped external volume |
|
Migration |
The setting status of the nondisruptive migration function Enable: Enabled, Disable: Disabled |
|
CLPR |
The CLPR ID |
|
Data Direct Mapping |
The setting status of the data direct mapping attribute Enable: Enabled, Disable: Disabled |
|
Command Device |
The setting status of the remote command device Enable: Enabled, Disable: Disabled |
|
LDEV(LDKC:CU:LDEV) |
The LDEV ID of the remote command device No value is output if the setting status of the Command Device is not "Enable". |
|
Add LDEV Mode |
The setting status for adding an LDEV to the created external volume group Enable: Enabled, Disable: Disabled |
|
Resource Group |
The resource group ID of the LDEV to be added No value is output if the ID is not specified. |
|
Safety Check |
Indicates whether to suppress the processing that affects the connection status of the existing path being used between the external storage system and the local storage system. Enable: The processing is suppressed. Disable: The processing is not suppressed. |