Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,Out-of-band,uid=user-name,,[Config Command],,,Accept, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Add DP Pool ++Pool ID=10,Pool Name=Pool_Name_AA,Warning Threshold(%)=85, High water mark Threshold(%)=85 ++LDEV(LDKC:CU:LDEV) ={0x00:0xAA:0xBB,0x00:0xCC:0xDD,……,0x00:0xEE:0xFF}, Num. of LDEVs=4 ++Suspend TI Pair=Yes,Auto Add Pool Volume=Enable
Detailed Information
Item |
Description |
---|---|
Command |
The command name |
Pool ID |
The pool number of a pool for Dynamic Provisioning to be created |
Pool Name |
The pool name of a pool for Dynamic Provisioning to be created |
Warning Threshold(%) |
The warning threshold of the usage rate of a pool for Dynamic Provisioning to be created |
High water mark Threshold(%) |
The depletion threshold of a pool for Dynamic Provisioning to be created |
LDEV(LDKC:CU:LDEV) |
The LDEV IDs for LDEVs of a pool volume |
Num. of LDEVs |
The number of pool volumes |
Suspend TI Pair |
The setting status of Suspend TI Pair when the High water mark Threshold is exceeded. Yes: Thin Image pair is suspended. No: Thin Image pair is not suspended. A hyphen (-) is output if it is not specified at the command option |