Example 1: when the copy type is SIMF
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Suspend Pair
++Copy Type=SIMF,I/F Version=0x40,Execute Type=Cmd. Device
++P-VOL(CU:LDEV)=0x00:0x00,S-VOL(CU:LDEV)=0x00:0x02, MCU S/N=32652,MCU
SSID=0x1B60,RCU S/N=32652,RCU SSID=0x1B60, S-VOL Write=Enable,Suspend
Type=Steady,Range=LU,CTG=
Example 2: when the copy type is TCMF
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Suspend Pair
++Copy Type=TCMF,I/F Version=0x31,Execute Type=Cmd. Device
++P-VOL(CU:LDEV)=0x00:0x00,S-VOL(CU:LDEV)=0x00:0x05, MCU S/N=32652,MCU
SSID=0x1B60,RCU S/N=32653,RCU SSID=0x1B60, P-VOL Write=,S-VOL RD/WR=Disable,Swapping
Mode=, Reverse Resync Mode=Disable,Range=Group,CTG Attribute=CTG,
CTG=0x7F
Example 3: when the copy type is URMF
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Suspend Pair
++Copy Type=URMF,I/F Version=0x40,Execute Type=Cmd. Device
++P-VOL(CU:LDEV)=0x00:0x00,S-VOL(CU:LDEV)=0x00:0x01, MCU S/N=32652,MCU
SSID=0x1B60,RCU S/N=32653,RCU SSID=0x1B60, S-VOL RD/WR=Disable,Swapping Mode=,
Reverse Resync Mode=Disable,Range=Group,Suspend Mode=Purge, CPU Time=
Detailed Information
|
Item |
Description |
|---|---|
|
Output items common to Example 1 to Example 3 |
|
|
Command |
The command name |
|
Copy Type |
The copy type SIMF: ShadowImage for Mainframe, TCMF: TrueCopy for Mainframe, URMF: Universal Replicator for Mainframe |
|
I/F Version |
The command interface version |
|
Execute Type |
The volume type for executing the command Receive Device: LDEV which receives the command Cmd. Device: Command device |
|
P-VOL(CU:LDEV) |
The CU number and the LDEV number of the primary volume |
|
S-VOL(CU:LDEV) |
The CU number and the LDEV number of the secondary volume |
|
MCU S/N |
The serial number of the local storage system |
|
MCU SSID |
The SSID to which a volume on the local storage system belongs The SSID to which the primary volume belongs for operating ShadowImage for Mainframe pairs |
|
RCU S/N |
The serial number of the remote storage system The same value as MCU S/N is output for operating ShadowImage for Mainframe pairs |
|
RCU SSID |
The SSID to which a volume on the remote storage system belongs The SSID to which the secondary volume belongs for operating ShadowImage for Mainframe pairs |
|
Output items when Copy Type is SIMF |
|
|
S-VOL Write |
Indicates whether the writing to the secondary volume is enabled Enable: Enabled, Disable: Disabled |
|
Suspend Type |
The suspend type Steady: Normal suspend, Quick: High-speed suspend |
|
Range |
The suspend range LU: Only the pair to be operated Group: All pairs in the consistency group to which the pair to be operated belongs No value is output if I/F Version is less than 0x04. |
|
CTG |
The consistency group ID No value is output if I/F Version is less than 0x04. No value is output if Range is LU. |
|
Output items when Copy Type is TCMF |
|
|
P-VOL Write |
Indicates whether the writing to the primary volume is enabled Enable: Enabled, Disable: Disabled No value is output if I/F Version is less than 0x10 or if Range is Group. |
|
S-VOL RD/WR |
Indicates whether the Read/Write access to the secondary volume is enabled Enable: Enabled, Disable: Disabled No value is output if I/F Version is less than 0x03. |
|
Swapping Mode |
The setting status of the swapping mode Enable: Enabled, Disable: Disabled No value is output if I/F Version is less than 0x44. |
|
Reverse Resync Mode |
The setting status of the reverse resync mode Enable: Enabled, Disable: Disabled No value is output if I/F Version is less than 0x03. |
|
Range |
The suspend range LU: Only the pair to be operated Group: All pairs in the consistency group to which the pair to be operated belongs No value is output if I/F Version is less than 0x04. |
|
CTG Attribute |
The consistency group attribute Open/MF CTG: Consistency group common to Open/Mainframe CTG: Consistency group for Mainframe No value is output if I/F Version is 0x30 or less than 0x22. No value is output if Range is LU. |
|
CTG |
The consistency group ID No value is output if I/F Version is less than 0x04. No value is output if Range is LU. |
|
Output items when Copy Type is URMF |
|
|
S-VOL RD/WR |
Indicates whether the Read/Write access to the secondary volume is enabled Enable: Enabled, Disable: Disabled |
|
Swapping Mode |
The setting status of the swapping mode Enable: Enabled, Disable: Disabled No value is output if I/F Version is less than 0x44. |
|
Reverse Resync Mode |
The setting status of the reverse resync mode Enable: Enabled, Disable: Disabled |
|
Range |
The suspend range LU: Only the pair to be operated Group: All pairs in the consistency group to which the pair to be operated belongs EXCTG: All pairs in the extended consistency group to which the pair to be operated belongs |
|
Suspend Mode |
Indicates how to handle updated data that is not reflected in the secondary volume Flush: The updated data is reflected when suspending a pair. Purge: The updated data is not reflected when suspending a pair. However, the updated data is reflected when the pair is resynchronized later. |
|
CPU Time |
The CPU time stamp value in the form of YYYY/MM/DD hh:mm:ss No value is output if Suspend Mode is Purge. |