Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,, [Config Command],,,Accept, from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Change Tier Option ++I/F Version=0x41 ++LDEV(CU:LDEV)=0x00:0x00,Parameter Check=Enable, Execute Type=Cmd. Device,SSID=0x1B60,S/N=32652, Tiering Policy=Enable,Tiering Policy Level=0,Relocation=Start, New Page Assignment Tier=Middle,Relocation Priority=Default
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
I/F Version |
The command interface version |
|
LDEV(CU:LDEV) |
The CU number and the LDEV number of a volume whose storage tier is to be changed |
|
Parameter Check |
The setting status of the prior confirmation Enable: Enabled, Disable: Disabled |
|
Execute Type |
The volume type for executing the command Receive Device: LDEV which receives the command Cmd. Device: Command device |
|
SSID |
The SSID to which the volume to be operated belongs |
|
S/N |
The serial number of the storage system to be operated |
|
Tiering Policy |
The availability of the tiering policy level change Enable: Changed, Disable: Not changed |
|
Tiering Policy Level |
The tiering policy ID to be changed No value is output when Tiering Policy is Disable. |
|
Relocation |
The tier relocation command (Start or Stop) A hyphen (-) is output for the value if it is not specified at the command option |
|
New Page Assignment Tier |
The new page assignment tier High: High performance tier, Middle: Middle performance tier, Low: Low performance tier A hyphen (-) is output for the value if it is not specified at the command option |
|
Relocation Priority |
The tier relocation priority Prioritize: Prioritized, Default: Normal A hyphen (-) is output for the value if it is not specified at the command option |