Example
09xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,In-band MF,uid=user-name,,
[Config Command],,,Accept,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx +Command=Add RCU ++I/F
Version=0x11,Execute Type=Cmd. Device ++MCU S/N=32652,MCU SSID=0x0000,RCU
S/N=12345,RCU SSID=0x0000, Controller ID=7,Path Gr. ID=,Range=CU ++{MCU Port,RCU
Port,RCU CU}=[{2B,3C,0x00}],Num. of Paths=1
Detailed Information
|
Item |
Description |
|---|---|
|
Command |
The command name |
|
I/F Version |
The command interface version |
|
Execute Type |
The volume type for executing the command Receive Device: LDEV which receives the command Cmd. Device: Command device No value is output if I/F Version is less than 0x11 or if Range is System. |
|
MCU S/N |
The serial number of the local storage system |
|
MCU SSID |
The SSID to which a volume on the local storage system belongs No value is output if Range is System. |
|
RCU S/N |
The serial number of the remote storage system |
|
RCU SSID |
The SSID to which a volume on the remote storage system belongs No value is output if Range is System. |
|
Controller ID |
The controller ID of the remote storage system 5: USP V/VM, 6: VSP, 7: VSP G1000/G1500 and VSP F1500 |
|
Path Gr. ID |
The path group ID No value is output if I/F Version is less than 0x11 or if Range is CU. |
|
Range |
The connecting mode to RCU CU: CU connection, System: Storage system connection No value is output if I/F Version is less than 0x11. |
|
MCU Port |
The port name of the local storage system |
|
RCU Port |
The port name of the remote storage system |
|
RCU CU |
The CU number of the remote storage system No value is output if Range is System. |
|
Num. of Paths |
The number of paths to be created |