Hardware summary
Item | Description |
---|---|
Edit Storage System | Allows editing of the storage system name, contact, and location. |
Storage System Name | Device name of the storage system. |
Contact | Contact information such as personnel and telephone number where you can inquire about the storage system. |
Location | Location of the connected storage system. |
Storage System Type | Model type of the storage system. |
Serial Number | Serial number of the storage system. |
IP Address | IP address of the SVP. |
Software Version | Version of the following software:
|
Total Cache Size | Total size of the cache memory in the storage system. The capacity used as the shared memory is not included. |
Allocation summary
Item | Description |
---|---|
Internal / External | This item switches the displayed items.
|
Open/Mainframe | This item switches the displayed capacity units.
|
Capacity Unit | This item switches the displayed units of the capacity.
|
Physical Summary | This item displays the capacity of physical logical devices and the number of devices. The information for open systems and mainframe systems is different. For details about this item, see the Physical Summary table. |
Virtual Summary | This item displays capacity of virtual logical devices and the number of devices. The information for open systems and mainframe systems is different. For details about this item, see the table below about virtual summary. |
Total Efficiency | This field is blank if the calculation for items below is not complete. A hyphen (-) is displayed if the information is not valid. For details, see the Provisioning Guide.
Note: The date and time in the square brackets are the system date and time (date, time, and timezone) of the storage system. For Last Updated in HDvM - SN, the date and time based on the system date and time (date, time, and timezone) of the SVP are displayed. Therefore, if the settings of the system date and time for the storage system and the ones for the SVP are different, the date and time in the square brackets in this window and the date and time displayed for Last Updated are also different. |
Total Saving (Software Deduplication, Software Compression, FMD Compression) | Total Saving: Displays the ratio and capacity reduced by the capacity saving function against all data in a storage system. When you use the capacity saving function, the saving ratio is calculated against metadata, garbage data, and parity data generated by the storage system in addition to user data. If the amount of used data volume before the capacity saving function is executed is smaller than the used pool capacity, a value which is invalid and smaller than the actually saved capacity might be displayed as the saved capacity. Software Deduplication: Displays the ratio reduced by the deduplication function against all data in a storage system. Software Compression: Displays the ratio reduced by the software compression function against all data in a storage system. FMD Compression: Displays the ratio reduced by the FMD compression function against all data in a storage system. |
Total DP Subscription Rate | This item displays the ratio of virtual logical device capacity to physical logical device capacity in the pool volume of Dynamic Provisioning. For a Dynamic Provisioning pool in which Thin Image pairs are created, the virtual logical device capacity includes the snapshot data capacity. |
Total Number of LDEVs | The number of LDEVs. The information displayed in this field depends on the type of system. See the following table. |
Physical summary
Item | Description |
---|---|
Allocated | When Open is selected from Open / Mainframe, this item displays the capacity of path-defined open system volumes (LDEVs) and the number of logical devices that the host can recognize. This capacity does not include the control cylinder. When Mainframe is selected from Open / Mainframe, this item displays the capacity of path-defined mainframe and multiplatform volumes and the number of logical devices that the host can recognize. The Reserved - Used DP Pool, Reserved - Unused DP Pool, and Reserved - Other volumes are not included. This capacity does not include the control cylinder. |
Reserved - Used DP Pool | When Total is selected in Internal / External, this item displays the total capacity of the pages that are actually used in pool of Dynamic Provisioning and the number of logical devices. The total capacity does not include the control cylinder. For a DP pool in which Thin Image pairs are created, the total page capacity includes the snapshot data capacity. When an item other than Total is selected in Internal / External, this item displays the number of logical devices that are actually used in the Dynamic Provisioning pool. The capacity does not display in this item, but is counted as part of Reserved - Other. |
Reserved - Unused DP Pool | When the total is selected in Internal / External, this item displays the capacity remaining after subtracting the Used DP Pool value from the total capacity of pool of Dynamic Provisioning. Control cylinder is not included in the capacity. The number of logical devices does not display. When an item other than Total is selected in Internal / External, the capacity and the number of logical devices are not displayed in this item, and the capacity is counted as part of Reserved - Other. |
Reserved - Other |
When Open is selected from Open / Mainframe, this item displays the total capacity and the number of logical devices of the following volumes:
The control cylinder is not included in the capacity. The total capacity includes:
When Mainframe is selected from Open / Mainframe, this item displays the total capacity of journal volumes and the number of logical devices of the mainframe and multi-platform volumes. The control cylinder is not included in the capacity. The total capacity includes the capacity of the system pool-VOL management area (approximately 3.7 GB per pool). For both open and mainframe, when an item other than Total is selected in Internal / External, the capacities for Reserved - Used DP Pool and Reserved - Unused DP Pool are also counted as part of this item. |
Available Space - Unallocated | When Open or Total is selected from Open / Mainframe, this item displays the volume capacity and the number of logical devices from the open volumes that are not defined paths. The Reserved - Used DP Pool, Reserved - Unused DP Pool, and Reserved - Other volumes are not included. The control cylinder is also not included in the capacity. When Mainframe is selected from Open / Mainframe, the capacity and the number of logical devices do not display. |
Available Space - Free Space | When Open is selected from Open / Mainframe, this item displays the free space in which users can create Open volumes. When Mainframe is selected from Open / Mainframe, this item displays the free space in which users can create Mainframe-systems and multi-platform volumes. In both Open and Mainframe, the control cylinder is not included in the capacity, and the number of logical devices does not display. |
Physical Total | This item displays the total capacity of physical logical devices and the number of logical devices. Control cylinder is not included in the capacity. |
Virtual summary
Item | Description |
---|---|
DP Allocated * | When total is selected in Internal / External, this item displays the capacity of path-defined virtual volumes of Dynamic Provisioning, and the number of logical devices. Virtual volumes for Thin Image are not included. Control cylinder is not included in the capacity. |
DP Unallocated* | When total is selected in Internal / External, this item displays the capacity of virtual volumes of Dynamic Provisioning that are not path-defined, and the number of logical devices. Virtual volumes for Thin Image are not included. Control cylinder is not included in the capacity. |
Other* | When total is selected in Internal / External, the item displays the virtual volumes of other than Dynamic Provisioning and the number of logical devices. Control cylinder is not included in the capacity. |
Virtual Total | This item displays the total capacity of virtual logical devices and the number of logical devices. Control cylinder is not included in the capacity. |
* When an item other than Total is selected in Internal / External, the capacity and the number of logical devices are not displayed. |