You can return the certificate that was updated by the procedure in
Uploading a signed certificate to default.
- You must have the Storage Administrator (Initial Configuration) role to perform this task.
- You must be an external authentication user whose external user group mapping is
disabled, or a local authentication user.
-
Close all
Device Manager - Storage Navigator sessions on the SVP.
-
On the
Device Manager - Storage Navigator computer, open a web browser and enter the following URL to open the
Tool Panel dialog box.
http://IP-address-or-host-name-of-SVP/cgi-bin/utility/toolpanel.cgi
-
In the
Tool Panel dialog box, click
Update Certificate Files. The
Update Certificate Files login dialog box opens.
If SSL communication has been established, the
Security Alert dialog box opens before the login dialog box. In the
Security Alert dialog box, click
OK.
-
In the
Login dialog box, enter the administrator user ID and password, and click
login. The
Upload dialog box opens.
-
In the
Upload dialog box, click
Return to Default. A confirmation dialog box opens.
-
Click
Yes to confirm and close the dialog box.
When the certificate update is complete, the SVP Web server restarts to show the update. When the restart is complete, the
Update Completion dialog box opens.
-
In the
Update Completion dialog box, click
OK. The dialog box closes and the display returns to the
Login dialog box.
Note: If an error occurs during the certificate update, an error message appears. Resolve the problem described in the error message and then repeat this procedure, starting with Step 4 (login) above.
Note: If the
Security Alert dialog box for the certificate opens at other times, click
View Certificate to confirm that the certificate is correct and then click
Yes.