Enabling NTP settings on HA800 G2/G3 series servers

If you want to configure NTP settings during a new management cluster configuration or during the UCP Expansion operation, you must enable the NTP settings on HA800 G2/G3 series servers using the iLO console.

1. Log on to the iLO console.
2. Navigate to Dedicated Network Port.
3. Click the SNTP tab, and do the following:
   • Disable the Use DHCPv4 Supplied Time Settings option.
   • Disable the Use DHCPv6 Supplied Time Settings option.
   • Enable the Propagate NTP Time to Host option.

   Note: For more information, see "Configuring iLO SNTP settings" in the Hitachi Advanced Server HA800 Series iLO 6 User Guide.