Available Parity Groups table
Use the Available Parity Groups table on the Edit Encryption window to view a list of the available parity groups.
Item |
Description |
---|---|
Parity Group ID |
Displays the parity group ID. |
RAID Level |
Displays the RAID level of the parity group. For an interleaved parity group, the interleaved number appears after the RAID level. Example: 1(2D+2D)*2 |
Capacity |
Displays the total capacity (unit) of the parity group. |
Drive Type/Interface/RPM |
Displays information about the drives in the parity group:
|
Encryption |
Displays the encryption setting for the parity group:
If accelerated compression is enabled on the parity group, do not select Enable for Encryption. If you do, an error will occur when you perform the task. |
Format Type |
Select the format type of the parity group. You do not need to format volumes when there are none in the selected parity group. Therefore, the format type in the Selected Parity Groups list becomes a hyphen (-) regardless of the status of the format type. |
Selected Parity Groups table
Use the Selected Parity Groups table to remove the parity group from the list.
Item |
Description |
---|---|
Parity Group ID |
Displays parity group ID. |
RAID Level |
Displays the RAID level of the parity group. For an interleaved parity group, the interleaved number appears after the RAID level. Example: 1(2D+2D)*2 |
Capacity |
Displays the total capacity (unit) of the parity group. |
Drive Type/Interface/RPM |
Displays information about the drives in the parity group:
|
Encryption |
Displays the encryption setting for the parity group:
|
Format Type |
Displays the selected format type of the parity group. You do not need to format volumes when there are none in the selected parity group. In this case, the format type in Selected Parity Groups becomes a hyphen (-) regardless of the status of the format type. |
Remove |
Removes the selected parity groups from the Selected Parity Groups table. |