System Option Mode for connecting Sun StorageTek 2540
When you connect Sun StorageTek 2540 as an external storage system, you must set SOM 725 of the local storage system to ON. If SOM 725 is not set to ON, the external storage system might be blocked when performing maintenance tasks such as rebooting the controller of the external storage system before the firmware update.
For more information about using SOM 725, log on to the Hitachi Vantara Support Connect: https://knowledge.hitachivantara.com/Documents
System option parameters for connecting Sun StorageTek 2540
The port must be configured as a target attached to a Windows host.
Set system parameters according to the following table. For connection parameters not shown, refer to Sun StorageTek 2540 documentation.
| Parameter | Parameter Setting |
|---|---|
| host type | Windows 2K non Clustered DMP |