When you connect an EMC VNX series as an external storage system, set the system parameters of the EMC VNX series according to the following table:
| Parameter | Setting |
|---|---|
| Initiator Type | CLARiiON Open |
| Failover Mode | 2 |
| ArrayCommPath | Disable |
For system parameters not shown in the table, see the EMC VNX series documentation.
Note:
- Volumes created with Individual Disk Units (JBOD disks) of EMC CLARiiON VNX series are not supported.
- For each port in the EMC CLARiiON VNX side, make sure to define LUN 0 (VSP E series) or the LU number (VSP 5000 series).