Assign Secondary Volumes confirmation window

This window is the second window of the Assign Secondary Volumes wizard.

The following image shows this window.

Selected Pairs table

The following table lists the items in this table on the Confirm window.

Item	Description
Primary Volume	The P-VOL information. Values: LDEV ID The P-VOL's LDEV identification number. LDEV Name The P-VOL's LDEV name. If you have not allocated an LDEV to the S-VOL, a hyphen (-) is displayed. Port ID The port name of the P-VOL LDEV's LUN path. Host Group Name / iSCSI Target Alias The host group name and ID or iSCSI target alias and ID of the P-VOL LDEV's LUN path. iSCSI Target Name The P-VOL's iSCSI target name. LUN ID The LUN identification number of the P-VOL LDEV's LUN path. Attribute The P-VOL's attribute. Capacity The P-VOL's capacity. CLPR The P-VOL's CLPR ID. Capacity Saving Information about the P-VOL's capacity saving function. Compression The compression function is used. Deduplication and Compression The deduplication function and the compression function are used. Disabled The capacity saving function is not used. Compression Acceleration Compression accelerator settings. Enabled: The compression accelerator setting is enabled. Disabled: The compression accelerator setting is disabled. - (hyphen): The compression accelerator setting is not available for an LDEV. Alternatively, the compression accelerator setting is available for an LDEV whose capacity saving setting is Disabled and whose capacity saving status is Disabled. T10 PI The P-VOL's T10 PI attribute information. Enabled The P-VOL's T10 PI attribute is enabled. Disabled The P-VOL's T10 PI attribute is disabled.
Snapshot Group	The snapshot group name. Information is displayed for this item only if you have configured a snapshot group for the HTI pair.
Status	The pair status. For more information about pair status, see Thin Image Advanced pair status definitions.
Secondary Volume	The S-VOL information. Values: LDEV ID The S-VOL's LDEV identification number. If you have not allocated an LDEV to the S-VOL, this item is blank. LDEV Name The S-VOL's LDEV name. If you have not allocated an LDEV to the S-VOL, a hyphen (-) is displayed. Port ID Port name of the S-VOL LDEV's LUN path. Host Group Name / iSCSI Target Alias The host group name and ID or iSCSI target alias and ID of the S-VOL LDEV's LUN path. iSCSI Target Name The S-VOL's iSCSI target name. LUN ID The LUN identification number of the S-VOL LDEV's LUN path. Attribute The S-VOL's attribute. Capacity The S-VOL's capacity. CLPR The S-VOL's CLPR ID. Capacity Saving Information about the S-VOL's capacity saving function. Compression The compression function is used. Deduplication and Compression The deduplication function and the compression function are used. Disabled The capacity saving function is not used. Compression Acceleration Compression accelerator settings. Enabled: The compression accelerator setting is enabled. Disabled: The compression accelerator setting is disabled. - (hyphen): The compression accelerator setting is not available for an LDEV. Alternatively, the compression accelerator setting is available for an LDEV whose capacity saving setting is Disabled and whose capacity saving status is Disabled. T10 PI The S-VOL's T10 PI attribute information. Enabled The S-VOL's T10 PI attribute is enabled. Disabled The S-VOL's T10 PI attribute is disabled.
Pool Name (ID)	The pool name and identification number.
Mirror Unit	The mirror unit number.
Cascade	Indicates whether a cascaded pair can be created. Enabled Cascaded pairs can be created. Disabled Cascaded pairs cannot be created.
Topology ID	The topology ID, which indicates the layer of the pair based on the mirror unit. The topology ID consists of the LDEV ID of the root volume and the mirror unit number.

Remove Secondary Volumes table

This table is displayed if a volume is selected that was already assigned to other snapshot data (by leaving the Exclude Assigned Volumes check box unselected in the Assign Secondary Volumes window).

The following table lists the items in this table on the Confirm window.

Item	Description
LDEV ID	The LDEV identification number, which you can specify as the S-VOL.
LDEV Name	The LDEV's name.
Attribute	The LDEV's attribute.
Capacity	The LDEV's capacity.
CLPR	The LDEV's CLPR ID.
Remount Device	Indicates whether remounting the device is required.
Snapshot Group	The snapshot group name. Information is displayed for this item only if you have configured a snapshot group for the HTI pair.
Status	The pair status. For more information about pair status, see Thin Image Advanced pair status definitions.
Snapshot Date	The date and time that you created the pair to store snapshot data.
Primary Volume	The P-VOL information. Values: LDEV ID The P-VOL's LDEV identification number. LDEV Name The P-VOL's LDEV name. If you have not allocated an LDEV to the S-VOL, a hyphen (-) is displayed. Attribute The P-VOL's attribute. Capacity The P-VOL's capacity. CLPR The P-VOL's CLPR ID.
Pool Name (ID)	The pool name and identification number.
Mirror Unit	The mirror unit number. A hyphen (-) is displayed if the volume is not an S-VOL of an existing pair.
Cascade	Indicates whether a cascaded pair can be created. Enabled Cascaded pairs can be created. Disabled Cascaded pairs cannot be created.
Pair Topology ID	The topology ID, which indicates the layer of the pair based on the mirror unit. The topology ID consists of the LDEV ID of the root volume and the mirror unit number.