The port must be configured as a target attached to a Windows host.
Set system parameters according to the following table. For connection parameters not shown, refer to Fujitsu FibreCAT CX series documentation.
For details about the supported models of the external storage system, contact customer support.
| Parameter | Parameter Setting |
|---|---|
| Initiator Type | CLARiiON Open |
| Failover Mode | 2 |
Volumes created with the RAID0 level or Individual Disk Units (JBOD disks) of Fujitsu FibreCAT CX series are not supported.
System option mode for connecting Fujitsu FibreCAT CX series
When you connect the Fujitsu FibreCAT CX series as an external storage system, you must set SOM 725 of the local storage system to ON. If SOM 725 is not set to ON, the external storage system might be blocked when a maintenance task such as rebooting the controller of the external storage system is performed before the firmware update.
For more information about using SOM 725, log on to the Hitachi Vantara Support Connect: https://knowledge.hitachivantara.com/Documents