When you connect an EMC CLARiiON CX series as an external storage system, set the system parameters according to the following table.
| Parameter | Setting |
|---|---|
| Initiator Type | CLARiiON Open |
| Failover Mode | 2 |
| ArrayCommPath | Disabled |
For system parameters not shown in the table, see the EMC CLARiiON CX series documentation.
Note:
- Volumes created with Individual Disk Units (JBOD disks) of EMC CLARiiON CX series are not supported.
- For each port in the EMC CLARiiON CX side, make sure to define LUN 0 (VSP E series) or the LU number (VSP 5000 series).