Removing or replacing an external path

Universal Volume Manager User Guide

Version

9.8.6

Audience

anonymous

Part Number

MK-98RD9016-12

You can remove a path so it is no longer available to the external volume. You remove a path to replace it with another external path or to perform maintenance on the physical link.

Note: If all external paths are not removed before detaching a channel board, the channel board cannot be detached.

Before removing a path, make sure it is disconnected. See Disconnecting an external path for instructions.

Open the External Storage window.
1. Click Storage Systems, and then expand the Storage Systems tree.
2. Click External Storage.
On the External Storage Systems tab, click the link for an external system.
On the External Path Groups tab, select a path group.
Click Edit External Path Configuration.
In the Edit External Path Configuration window, in the Selected External Paths list, select the path to be removed, and then click Remove.
Click Finish.
In the confirmation window:
1. Confirm the settings.
2. Accept the default task name or enter a unique name.
  You can enter up to 32 letters, numbers, and symbols, except these:
  \ / : , ; * ? " < > |
3. If you want to view the list of tasks for the storage system after clicking Apply, select Go to tasks window for status.
Click Apply.
If you are replacing the path, see Adding an external path to an existing path group.