Device Manager - Storage Navigator actions and CCI commands

Universal Volume Manager User Guide

Version: 9.8.6
Audience: anonymous
Part Number: MK-98RD9016-12

The following table lists actions that you can perform for external volumes in Device Manager - Storage Navigator and the corresponding CCI commands.

Device Manager - Storage Navigator action	CCI command
Add External Volumes	`raidcom add external_grp`^1,2 `raidcom discover external_storage`² `raidcom discover lun`²
Delete External Volumes	`raidcom delete external_grp`
Disconnect External Storage Systems	`raidcom disconnect external_grp`
Reconnect External Storage Systems	`raidcom check_ext_storage external_grp`
Edit External Volumes	`raidcom modify external_grp`
Assign MP Unit	`raidcom modify external_grp`
Disconnect External Volumes	`raidcom disconnect external_grp`
Reconnect External Volumes	`raidcom check_ext_storage external_grp`
Disconnect External Paths	`raidcom disconnect path`¹
Reconnect External Paths	`raidcom check_ext_storage path`¹
Edit External Path Configuration	`raidcom add path`^1,2 `raidcom delete path`¹
Notes: The virtual port operations can only be performed by using CCI. For more information, see the Command Control Interface Command Reference. It is recommended to specify the `-safety_check enable` option to run the command. If the `-safety_check enable` option is not specified, a route from the external storage system to the local storage system might be disconnected. For more information, see Considerations for external paths.