- The same IP address cannot be assigned to multiple ports. For this reason, you cannot apply the IEEE 802.3ad Link Aggregation Control Protocol (LACP).
- The ports cannot be used for remote paths or external paths.
- Auto negotiation cannot be set as the transfer speed. Set the transfer speed of the CHB port to 10 Gbps or 25 Gbps to match the port transfer speed of the connection-target NIC or switch.
- Selective ACK is enabled and cannot be disabled.
- If you use Router Advertisement (RA) to automatically set the default gateway, do not manually set the IP address of the default gateway. If you set it manually, performance delays might occur when multiple IPv6 routers exist in the same network. If you want to manually set the default gateway, do not set the option that specifies an IP address for the raidcom modify port command in CCI.