The physical SVP contains two rack rail assemblies. Each assembly consists of an inner fixed chassis rail that secures directly to the SVP chassis, and an outer fixed-rack rail that secures directly to the rack itself.
The physical SVP includes chassis ears that you must remove before installing the rails.
-
Remove the chassis ears.
-
Locate and remove the three screws holding the chassis ear in place.
-
Repeat action with the other chassis ear.
-
Find the
Front marking on the rails, and then orient the rails appropriately for attaching to the SVP chassis.
-
Screw the internal racks onto the SVP chassis using the four large screws and the two small screws.
-
Repeat steps 2 and 3 for the inner rail extension on the other side of the SVP chassis.