If you change an SVP port number, observe the following considerations.
Port number key name | Effect |
MAPPWebServer |
Using Hitachi Device Manager - Storage Navigator The URL specification method to log on to Storage Navigator changes. |
Using Hitachi Command Suite Match the port number used in Hitachi Command Suite to <SVP Change Port>. |
|
MAPPWebServerHttps |
Using Hitachi Device Manager - Storage Navigator: None |
Using Hitachi Command Suite Match the port number used in Hitachi Command Suite to <SVP Change Port>. |
|
RMIClassLoader | None |
RMIClassLoader |
Using Hitachi Command Suite Match the port number used in Hitachi Command Suite to <SVP Change Port>. |
RMIClassLoaderHttps |
Using Hitachi Device Manager - Storage Navigator When using the raidinf command (a program for obtaining configuration reports and obtaining tier relocation logs) to log on to Device Manager - Storage Navigator, specify <SVP Change Port> in addition to the SVP IP address or host name. |
RMIIFRegist |
When issuing the remote power ON/OFF tool (RmtPsTool) command, specify <SVP Change Port> for the Management Server Port Number parameter. |
When issuing the export tool command, specify <SVP Change Port> in addition to the SVP IP address using ip Subcommand to the SVP IP address. |
|
Using Hitachi Command Suite Match the port number used in Hitachi Command Suite to the new SVP port. |
|
PreRMIServer | None |
DKCManPrivate | None |
SMI-S (SLP) |
Using SMI-S: Match the port number used in the SMI-S communication to <SVP Change Port>. |
SMIS_CIMOM |
Match the port number used in the SMI-S communication to <SVP Change Port>. For a storage system running firmware version 83-03-01-xx/00 or later, register the storage system, and then set it after verifying the port numbers to be used (see Viewing the port number to be used in the SVP) |
CommonJettyStart | None |
CommonJettyStop | None |
RestAPIServerStop | None |
DeviceJettyStart | None |
DeviceJettyStop | None |