Installing or upgrading each product

Ops Center Installation and Configuration Guide
Version
11.0.x
Audience
anonymous
Part Number
MK-99OPS001-23
To install or upgrade each product, use the Client Express installer.
For best results, close all other programs, including:
  • Security-monitoring programs
  • Virus-detection programs
  • Process-monitoring programs

If the Services window is open, close it.

  1. Log in to the server as the root user or use the sudo command.
  2. To start the Client Express installer, run install.sh, which is in the following location in the installation media:
    root-directory-of-the-installation-media/install.sh
    Note: If one or more products cannot be installed in the same environment as a currently installed product, the Client Express installer will not install the applicable products and a warning message is displayed.
  3. If the yum repository settings are not configured or cannot be used, a message appears asking if you want to run the Yum Setup Helper tool. Follow the displayed message to configure the settings.
    1. To configure the settings, enter y. The Yum Setup Helper window is displayed.
    2. From Content in Current Dir, use the cursor keys and then the Enter key to select the directory that includes the OS media file (ISO file).
      Note: The Yum Setup Helper tool uses the OS media file to configure the yum repository settings, so the OS media file must be stored on the management server. If the OS media file does not exist, get it from the distribution website. Click Help to see information about the corresponding OS media file.
    3. Select the ISO file. The file name is displayed for Selected Item.
    4. Click OK. Configuration of the yum repository settings starts, and a processing window is displayed.
      Tip: You can also use the tab key to move the cursor between items in the window.
    5. When configuration of the yum repository settings is complete, a message is displayed. Select OK. If the configuration fails, an error message is displayed. If you select OK, the window where you can select an OS media file is displayed again.
  4. Choose the product you want to install, and then press Enter.
    If you select 1 All, the products listed within the parentheses are installed.

    To select multiple products, separate the numbers with commas. (Example: 2,3)

    Note: You cannot select products that have ** displayed for the product number.
  5. Follow the prompts and specify the required information.
    For API Configuration Manager:
    Setting items Description
    Install directory

    For a new installation:

    • Specify the directory in which to install API Configuration Manager.

      It will be installed in the following location:

      specified-directory/ConfManager

      The default location is as follows:

      /opt/hitachi/ConfManager

    • Specify a directory by using 64 or fewer bytes and the following characters:

      A-Z, a-z, 0-9, underscores (_), and forward slashes (/)

      Note: You cannot specify the following paths:
      • /usr
      • /usr/local
      • /var
      • root directory (/)
    Whether backup is required

    For an upgrade installation:

    • Specify y or n.

    • Default: y
    Backup directory

    If you selected y for the setting "Whether backup is required" for an upgrade installation:

    • Specify the directory for the backup of API Configuration Manager.

      It will be backed up in the following location:

      specified-directory/backup/bak_CONFIG_MGR

      The default location is as follows:

      /opt/hitachi/backup/bak_CONFIG_MGR

    • Specify a directory by using 64 or fewer bytes and the following characters:

      A-Z, a-z, 0-9, underscores (_), and forward slashes (/)

      Note: You cannot specify the following paths:
      • /usr
      • /usr/local
      • /var
      • root directory (/)
    For Protector Client:
    Setting items Description
    Install directory

    For a new installation:

    • Specify the directory in which to install Protector Client.

      It will be installed in the following location:

      specified-directory/protector

      The default location is as follows:

      /opt/hitachi/protector

    • Specify a directory by using 64 or fewer bytes and the following characters:

      A-Z, a-z, 0-9, underscores (_), and forward slashes (/)

      Note: You cannot specify the following paths:
      • /usr
      • /usr/local
      • /var
      • root directory (/)
    Node name

    For a new installation:

    Default: Node name of the operating system
    Master node name

    For a new installation:

    Specify the node name or IP address of the master OS.
    Internet connected

    For a new installation:

    Select whether to install a client node as a node connected to the internet.
    • Specify y or n.

    • Default: n
    For Analyzer probe server:
    Setting items Description
    Application data path For a new installation:

    • Specify the directory where the application data will be stored.

      The default location is as follows:

      /home

    • If you specify a directory other than the default, refer to the product manual for the requirements.
    HTTP access port for internal communication

    For a new installation:

    If port number 8080 is being used by another program, specify a value from 10000 to 65530.
    HTTPS access port

    For a new installation:

    If port number 8443 is being used by another program, specify a value from 10000 to 65530.
    Port used for the on-demand real time monitoring module

    For a new installation:

    If port number 24262 is being used by another program, specify a value from 10000 to 65530.
    Do you want to install the Virtual Storage Software Agent?

    If the Virtual Storage Software Agent is not installed:

    When you want to monitor the VSP One SDS Block, you need to install the Virtual Storage Software Agent.

    • Specify y or n.

    • Default: n
    Installation destination directory for the Virtual Storage Software Agent

    When installing the Virtual Storage Software Agent:

    • Specify the installation destination directory for the Virtual Storage Software Agent:

      It will be installed in the following location:

      specified-directory/VirtualStorageSoftwareAgent

      The default location is as follows:

      /opt/hitachi/VirtualStorageSoftwareAgent

    • If you specify a directory other than the default, refer to the product manual for the requirements.
    IP address of the Analyzer server

    When installing the Virtual Storage Software Agent:

    The IP address specified here is used when configuring the firewall.

    • Specify a value in IPv4 format.

    • Default: IP address of the system
    For Command Control Interface:
    Setting items Description
    Install directory

    For a new installation (when installing API Configuration Manager or Protector Client):

    • Specify the directory in which to install Command Control Interface.

      It will be installed in the following location:

      specified-directory/HORCM

      The default location is as follows:

      /opt/hitachi/HORCM

    • Specify a directory by using 64 or fewer bytes and the following characters:

      A-Z, a-z, 0-9, underscores (_), and forward slashes (/)

      Note: You cannot specify the following paths:
      • Paths containing /ConfManager/
      • Root directory (/)
  6. Check the information you entered and the message that appears.

    If both API Configuration Manager and Protector Client are included as products to install, a message related to Command Control Interface might appear. Check the message and then continue.

    If there are no problems, press y to begin the installation.

    Note: If you are installing Analyzer probe server, the following message might appear, but you can ignore it.
    root@localhost's password:
  7. When the installation is complete, the results are displayed:
    • If all installation tasks finished successfully, Completed successfully. is displayed.
    • If any task fails, Failed. is displayed.