By deploying the Hitachi Ops Center OVA file, you can create a virtual machine on which the
products are installed.
- From a VMware vSphere client, log in to the VMware ESXi server.
- From the VMware vSphere client, deploy the Hitachi Ops Center OVA (OpsCenterVM_version.ova) by selecting File > Deploy OVF Template, and then follow the prompts.
-
To avoid IP address conflicts when the
virtual machine starts, change the settings so that
the machine does not connect to the network.
You can skip this step if you are sure that the IP addresses will not conflict.
When deployment is complete, the following network settings are set by default for the virtual machine:
- IP address: 172.30.197.92
- Network mask: 255.255.0.0
- Default gateway: 172.30.0.1
- Right-click the new virtual machine, and select Edit Settings.
- In the Hardware tab, select Network adapter 1, and then clear the Connect at power on check box.
- Start the virtual machine.
-
If you changed the settings in step 3 so
that the virtual machine does not connect to
the network when it starts, reselect the
Connect at power on check box.
- Right-click the virtual machine, and select Edit Settings.
- In the Hardware tab, select Network adapter 1, and then check the Connect at power on check box.