This service automatically submits a Create Online Migration Pair service task for each specified host. After the auto-submitted tasks are complete, you must submit the Migrate Data for Online Migration Pair service for each task to complete the migration.
When using this template, be aware of the following:
- The automated run of Create Online Migration Pair tasks used by this service is only supported only when Source Selection is Select Hosts. Since this service does not support volume selection, Select Volumes is not displayed in the Edit Service window.
- When multiple hosts are specified in this service, they are always divided into one-host per one-task format, and Create Online Migration Pair is run. If you want to run Create Online Migration Pair on multiple hosts at once, such as multiple hosts in a cluster configuration or multiple hosts to which the same volume has been allocated, you need to select multiple hosts and submit the Create Online Migration Pair service, instead of using this service.
- When you select multiple hosts in this service, the Create Online Migration Pair service will be automatically submitted by the number of hosts selected, so the selected number of hosts must be the upper limit or less of multiple runs of Create Online Migration Pair, Migrate Data for Online Migration Pair, and Clean up for Online Migration Pair tasks. A maximum of 25 hosts can be selected for execution. However, if N multiple task runs have already been performed for Create Online Migration Pair, Migrate Data for Online Migration Pair, and Clean up for Online Migration Pair, the maximum number of hosts that can be specified for this service is "25 - N". If you do not meet the requirements for multiple runs, the maximum number of hosts that can be specified in this service is 1.
See Additional prerequisites for multiple runs for more information.
- While the Create Online Migration Pairs for Multiple Hosts service task is running, do not edit the auto-created Create Online Migration Pair service whose name starts with "[Auto-registered Service for Create Online Migration Pair]". Since this service automatically edits the Create Online Migration Pair service, it is possible that the automatic run of the Create Online Migration Pair task might fail or run with incorrect input parameters if it is manually edited during that time.
- When running multiple tasks by the automatic run of Create Online Migration Pair tasks using this service, not all tasks are run automatically simultaneously, but each task is run sequentially after a few minutes.
- By default, this service automatically enables the host mode option "88. Port Consolidation" for the target host groups when the migration is performed. This lets you specify the same port on the target storage system even if there are multiple source storage systems for the same server. In v10.9.3 or later, you can disable this function by unchecking the "Set Host Mode Option 88 to Host Groups automatically" option.
- If the Use Diskless Quorum option is enabled and the task fails and one of the following conditions are met, the automatically created Diskless Quorum might remain. In this case, check the Quorum ID shown in the message and manually delete the Diskless Quorum:
- KNAE07604-I is not output to the task log. This message is output for the source and target storage systems respectively.
- KNAE07607-I is output to the task log.
Software and setup prerequisites
For software and setup prerequisites, see Online Migration with Configuration Manager service templates prerequisites.
Edit service settings
The following table lists the Edit service settings for the Create Online Migration Pair for Multiple Host service template.
| Navigation pane | Settings pane | Description |
|---|---|---|
| Source Settings | Source Selection | Specify the source resource as hosts. |
| Source Storage Management Connection | Specify the source storage management connection for selecting migration source hosts. | |
| Source Hosts Filter | Use the filters to display only the source hosts that match the specified criteria. | |
| Join Host Filters By | Use the "and" and the "or" operators to join multiple filters. | |
| Source Host Filter (Rows/Page) | Use the filter to display only the specified number of source hosts. | |
| Source Host Filter (Current Page) | Use the filter to display only the specified page number of the rows per page number of source hosts. | |
| Source Hosts | Specify the source hosts. If you select a host to which the clone copy pair volume is attached, confirm that the volume is not the secondary volume of the clone copy pair. |
|
| Source Configuration Manager Connection | Specify the source Configuration Manager connection for migration. | |
| Source Volume Filter (Resource Group) | Use the filters to display only the source volumes that belong to the resource group. | |
| Resource Group Name | Select the resource group to filter. | |
| Target Settings | Target Configuration Manager Connection | Specify the target Configuration Manager connection for migration. |
| Target Storage System | Specify the target storage system for migration. In the "Compression Acceleration" column,"unavailable" is displayed in the following cases:
If “available” is displayed, Compression Acceleration will be automatically enabled when the capacity saving function is enabled. If "unavailable" is displayed, Compression Acceleration will be automatically disabled when the capacity saving function is enabled. |
|
| Target Resource Group | Specify the target resource group. | |
| Target Pool | Specify the target pool. | |
| LDEV ID range starts from | Search for undefined LDEV IDs and allocate target volumes in order from the specified physical LDEV ID. If a physical LDEV ID is not specified, volumes with the same LDEV ID are allocated first. | |
| LDEV ID range ends at | Specify the last LDEV ID in the LDEV ID range. If the last LDEV ID is not specified, LDEV IDs are used up to the storage system maximum. | |
| Resource Group for preferential use with LDEV IDs | Specify the resource group to use first when searching for available physical LDEV IDs. If there are not enough available LDEV IDs in the resource group with the specified option, LDEV IDs in the resource group with the unspecified option are also used. | |
| Storage Port Mappings | Specify mappings for the source and target storage ports. Based on the mappings, the system configures the I/O path between the host and the target storage ports. | |
| Source Storage Port | Select a source storage port from the list of registered ports. | |
| Target Storage Ports | Select one or more target storage ports from the list of registered ports. | |
| Capacity Saving Settings for Target Volumes | Specify how to apply Capacity Saving settings to target volumes. If "Same as source volumes" is specified, the settings will be applied in the same way as the Capacity Saving settings for source volumes. If "Specify Capacity Saving settings" is specified, the settings selected in the following properties will be applied. If you select the storage system with "Compression Acceleration" available in the "Target Storage System", then Compression Acceleration is enabled when the capacity saving function is enabled. If you select a storage system where "Compression Acceleration" is unavailable, then Compression Acceleration is disabled. |
|
| Select Capacity Saving Function | Specify the Capacity Saving Function for the target volumes. Refer to your storage system product documentation for the optimal setting. | |
| Select Capacity Saving Mode | Specify the Capacity Saving Mode for the target volumes. Refer to your storage system product documentation for the optimal setting. | |
| Set Capacity Saving | Specify when to apply Capacity Saving settings to the target volumes. If "Before migration" is specified, the settings are applied before copying from the source volumes to the target volumes. In this case, Capacity Saving is in effect from the start of migration, but the time required for migration increases. If "After migration" is specified, the settings are applied after copying from the source volumes to the target volumes is complete. In this case, the migration time will not increase, and Capacity Saving will begin after the migration is complete. |
|
| Replication Settings | Copy Pace | Specify the copy speed. Increasing the value increases the copy speed. |
| Path Group ID Selection | Specify whether to manually select the path group ID. | |
| Path Group ID | Specify the path group ID. | |
| Use Diskless Quorum | Specify whether to use automatic diskless quorum creation. If selected, a common diskless quorum is created for each generated task of the Create Online Migration Pair service. | |
| Quorum Disk | Specify the quorum disk. | |
| Run Zero Page Reclaim | Specify whether to run zero page reclaim when the online migration is completed. | |
| Email Settings | Send email notification when the migration target volume path allocation is complete. | Specify whether to send an email notification when the migration target volume path allocation is complete. This enables you to confirm the path allocation listed in the email, then bring it online. |
| To: | Specify the primary (To) email notification addresses. | |
| Cc: | Specify additional Cc email notification addresses. | |
| Bcc: | Specify additional Bcc email notification addresses. | |
| Subject: | Specify the email subject. | |
| Notification mail body | Specify the text of the email body. | |
| Migration Settings | Delete the Host Group | Select the check box to delete the host group. |
| Delete the Volume | Select the check box to delete the volume. | |
| Storage System Lock Wait Time (seconds) | Specify the lock waiting time upper limit when acquiring the storage lock while changing the configuration. | |
| Set Host Mode Option 88 to Host Groups automatically | Select the checkbox to set Host Mode Option 88 to Host Groups automatically. | |
| Add Migration Progress to Notes | Specify whether to automatically add the migration progress to Notes of the Create Online Migration Pair task. If you enable this feature, create the Migrate Data for Online Migration Pair and Clean up Online Migration Pair services in the same service group as the Create Online Migration Pairs for Multiple Hosts service. | |
| Fabric Settings | Use Fabric Settings | Specify True to enable fabric information collection. |
| Target Fabrics | Specify the fabric name. Separate multiple values by commas. If omitted, all fabrics defined as FOS_PrimarySwitch or DCNM in Connections will be used. | |
| Fabric Connection Type | Specify the fabric type, either FOS_PrimarySwitch or DCNM to filter the Category in Connections. | |
| Connections | Specify the connection defined in the Web Service Connections on the Administration tab. If this value is omitted, the system uses all connections that are defined for the product name listed in the Web Service Connections. | |
| Use Existing Zone | Specifies whether to select a predefined zone or any connectable path. If you select this option, the system selects paths within the range of the existing active Zone setting. If you don not select this option, the system selects connectable paths regardless of the existing Zone setting. | |
| Number of Hops Restriction | Determines whether the service will fail if there is no path that matched the specified collection range. | |
| Maximum Number of Hops | When using the Number of Hops Restriction option, specify the collection range by the number of hops. | |
| Zone Settings | Update Zone Configurations | Specify True to enable the modify zone settings functionality. |
| Use Existing Zone Aliases | Specify True to use predefined zone aliases regardless of the naming conventions the user specifies. If you specify False, the system selects zone aliases that follow the naming conventions. In either case, if there are no existing zone aliases, the system creates new zone aliases that follow the naming conventions. | |
| Update Current Active Zone Configuration | Specify True to add a zone to the active zone configuration. | |
| Zone Configurations to Update | To add a zone to a zone configuration other than the active configuration, specify the name of the zone configuration in which to add the zone. | |
| Script for Zone Naming | Specify the naming convention script that determines the zone name for the path. | |
| Script for Host Zone Alias Naming | Specify the naming convention script that determines the zone alias name for the host port. | |
| Script for Storage Zone Alias Naming | Specify the zone information. | |
| Auto-registration Task Settings | Automatically Set the Task Name | Select to set the task name automatically for auto-registered tasks. |
| Task Name | Specify the task name for auto-registered tasks. | |
| Mark the Tasks as "To Do" | Select to mark the auto-registered tasks as To Do. |
Submit service settings
The following table lists the Submit service settings for the Create Online Migration Pair for Multiple Host service template.
| Navigation pane | Settings pane | Description |
|---|---|---|
| Source Settings | Source Selection | Specify the source resource as hosts. |
| Source Storage Management Connection | Specify the source storage management connection for selecting migration source hosts. | |
| Source Hosts Filter | Use the filters to display only the source hosts that match the specified criteria. | |
| Join Host Filters By | Use the "and" and the "or" operators to join multiple filters. | |
| Source Host Filter (Rows/Page) | Use the filter to display only the specified number of source hosts. | |
| Source Host Filter (Current Page) | Use the filter to display only the specified page number of the rows per page number of source hosts. | |
| Source Hosts | Specify the source hosts. If you select a host to which the clone copy pair volume is attached, confirm that the volume is not the secondary volume of the clone copy pair. |
|
| Source Configuration Manager Connection | Specify the source Configuration Manager connection for migration. | |
| Source Volume Filter (Resource Group) | Use the filters to display only the source volumes that belong to the resource group. | |
| Resource Group Name | Select the resource group to filter. | |
| Target Settings | Target Configuration Manager Connection | Specify the target Configuration Manager connection for migration. |
| Target Storage System | Specify the target storage system for migration. In the "Compression Acceleration" column,"unavailable" is displayed in the following cases:
If “available” is displayed, Compression Acceleration will be automatically enabled when the capacity saving function is enabled. If "unavailable" is displayed, Compression Acceleration will be automatically disabled when the capacity saving function is enabled. |
|
| Target Resource Group | Specify the target resource group. | |
| Target Pool | Specify the target pool. | |
| LDEV ID range starts from | Search for undefined LDEV IDs and allocate target volumes in order from the specified physical LDEV ID. If a physical LDEV ID is not specified, volumes with the same LDEV ID are allocated first. | |
| LDEV ID range ends at | Specify the last LDEV ID in the LDEV ID range. If the last LDEV ID is not specified, LDEV IDs are used up to the storage system maximum. | |
| Resource Group for preferential use with LDEV IDs | Specify the resource group to use first when searching for available physical LDEV IDs. If there are not enough available LDEV IDs in the resource group with the specified option, LDEV IDs in the resource group with the unspecified option are also used. | |
| Storage Port Mappings | Specify mappings for the source and target storage ports. Based on the mappings, the system configures the I/O path between the host and the target storage ports. | |
| Source Storage Port | Select a source storage port from the list of registered ports. | |
| Target Storage Ports | Select one or more target storage ports from the list of registered ports. | |
| Capacity Saving Settings for Target Volumes | Specify how to apply Capacity Saving settings to target volumes. If "Same as source volumes" is specified, the settings will be applied in the same way as the Capacity Saving settings for source volumes. If "Specify Capacity Saving settings" is specified, the settings selected in the following properties will be applied. If you select the storage system with "Compression Acceleration" available in the "Target Storage System", then Compression Acceleration is enabled when the capacity saving function is enabled. If you select a storage system where "Compression Acceleration" is unavailable, then Compression Acceleration is disabled. |
|
| Select Capacity Saving Function | Specify the Capacity Saving Function for the target volumes. Refer to your storage system product documentation for the optimal setting. | |
| Select Capacity Saving Mode | Specify the Capacity Saving Mode for the target volumes. Refer to your storage system product documentation for the optimal setting. | |
| Set Capacity Saving | Specify when to apply Capacity Saving settings to the target volumes. If "Before migration" is specified, the settings are applied before copying from the source volumes to the target volumes. In this case, Capacity Saving is in effect from the start of migration, but the time required for migration increases. If "After migration" is specified, the settings are applied after copying from the source volumes to the target volumes is complete. In this case, the migration time will not increase, and Capacity Saving will begin after the migration is complete. |
|
| Replication Settings | Copy Pace | Specify the copy speed. Increasing the value increases the copy speed. |
| Path Group ID Selection | Specify whether to manually select the path group ID. | |
| Path Group ID | Specify the path group ID. | |
| Use Diskless Quorum | Specify whether to use automatic diskless quorum creation. If selected, a common diskless quorum is created for each generated task of the Create Online Migration Pair service. | |
| Quorum Disk | Specify the quorum disk. | |
| Run Zero Page Reclaim | Specify whether to run zero page reclaim when the online migration is completed. | |
| Email Settings | Send email notification when the migration target volume path allocation is complete. | Specify whether to send an email notification when the migration target volume path allocation is complete. This enables you to confirm the path allocation listed in the email, then bring it online. |
| To: | Specify the primary (To) email notification addresses. | |
| Cc: | Specify additional Cc email notification addresses. | |
| Bcc: | Specify additional Bcc email notification addresses. | |
| Subject: | Specify the email subject. | |
| Notification mail body | Specify the text of the email body. | |
| Migration Settings | Delete the Host Group | Select the check box to delete the host group. |
| Delete the Volume | Select the check box to delete the volume. | |
| Storage System Lock Wait Time (seconds) | Specify the lock waiting time upper limit when acquiring the storage lock while changing the configuration. | |
| Set Host Mode Option 88 to Host Groups automatically | Select the checkbox to set Host Mode Option 88 to Host Groups automatically. | |
| Add Migration Progress to Notes | Specify whether to automatically add the migration progress to Notes of the Create Online Migration Pair task. If you enable this feature, create the Migrate Data for Online Migration Pair and Clean up Online Migration Pair services in the same service group as the Create Online Migration Pairs for Multiple Hosts service. | |
| Fabric Settings | Use Fabric Settings | Specify True to enable fabric information collection. |
| Target Fabrics | Specify the fabric name. Separate multiple values by commas. If omitted, all fabrics defined as FOS_PrimarySwitch or DCNM in Connections will be used. | |
| Fabric Connection Type | Specify the fabric type, either FOS_PrimarySwitch or DCNM to filter the Category in Connections. | |
| Connections | Specify the connection defined in the Web Service Connections on the Administration tab. If this value is omitted, the system uses all connections that are defined for the product name listed in the Web Service Connections. | |
| Use Existing Zone | Specifies whether to select a predefined zone or any connectable path. If you select this option, the system selects paths within the range of the existing active Zone setting. If you don not select this option, the system selects connectable paths regardless of the existing Zone setting. | |
| Number of Hops Restriction | Determines whether the service will fail if there is no path that matched the specified collection range. | |
| Maximum Number of Hops | When using the Number of Hops Restriction option, specify the collection range by the number of hops. | |
| Zone Settings | Update Zone Configurations | Specify True to enable the modify zone settings functionality. |
| Use Existing Zone Aliases | Specify True to use predefined zone aliases regardless of the naming conventions the user specifies. If you specify False, the system selects zone aliases that follow the naming conventions. In either case, if there are no existing zone aliases, the system creates new zone aliases that follow the naming conventions. | |
| Update Current Active Zone Configuration | Specify True to add a zone to the active zone configuration. | |
| Zone Configurations to Update | To add a zone to a zone configuration other than the active configuration, specify the name of the zone configuration in which to add the zone. | |
| Script for Zone Naming | Specify the naming convention script that determines the zone name for the path. | |
| Script for Host Zone Alias Naming | Specify the naming convention script that determines the zone alias name for the host port. | |
| Script for Storage Zone Alias Naming | Specify the zone information. | |
| Auto-registration Task Settings | Automatically Set the Task Name | Select to set the task name automatically for auto-registered tasks. |
| Task Name | Specify the task name for auto-registered tasks. | |
| Mark the Tasks as "To Do" | Select to mark the auto-registered tasks as To Do. |